Yayın tarihi için listeleme
Toplam kayıt 2670, listelenen: 1-20
-
Residual stress analysis and expansion of plastic zone in simple supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2006)In this study, a residual stress analysis is carried out on symmetric and antisymmetric cross-ply and angleply thermoplastic simple supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
Comparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828-EPIKURE 3090 and DURATEK KLM 606a-DURATEK KLM 606b
(2007)The aim of the study is to determine the optimum cure temperatures and kinetics for two different epoxy resin systems without using solvent. Two resin systems consist of EPIKOTE 828® epoxy resin-EPIKURE® 3090 polyamidoamine ... -
The effect of austenitizing time on martensite morphologies and magnetic properties of martensite in Fe-24.5%Ni-4.5%Si alloy
(2007)The effect of austenitizing time on the formation of martensite in Fe-24.5%Ni-4.5%Si alloy has been studied by means of transmission electronmicroscope (TEM), scanning electronmicroscope (SEM) and Mössbauer spectroscopy ... -
Ascetic and devotional elements in the Mutazilite tradition: The Suf? Mutazilites
(Blackwell Publishing Ltd, 2007)The Mutazilite thinkers are most often defined as rationalist, individualist, liberal and eccentric figures. To the above qualities, one should add ascetic and devotional aspects. Among the Mutazilite famous ascetics are ... -
Some aspects of thermally induced martensite in Fe-30% Ni-5% Cu alloy
(2007)Kinetical, morphological, crystallographical and several thermal properties of thermally induced martensite in the austenite phase of Fe-30% Ni-5% Cu alloy were investigated. Scanning electron microscope (SEM), transmission ... -
Residual stress analysis snd expansion of plastic zone in simple supported and clamped supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2007)In this study, a residual stress analysis is carried out on symmetric cross-ply and angle-ply thermoplastic simple supported and clamped supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
The effect of aluminum and ammonium perchlorate content on temperature sensitivity, mechanical properties and performance of HTPB propellants
(2007)This paper describes the effect of aluminum content variation of HTPB (hydroxyl terminated polybutadiene) propellants on temperature sensitivity, mechanical properties and performance values. Aluminum (Al) content was ... -
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ... -
Determination of noise level of a gas-fired pulse combustor
(2007)Experimental determination of noise level of a Helmholtz type gas-fired pulse combustor is presented. During the tests, the tail pipe length was varied from 1.9 m to 1.3 m by 10 cm intervals. Noise level measurements were ... -
Sürdürülebilir Kalkınma ve Çevre Muhasebesi (II)
(2007)Ekoloji ile ekonomi arasında doğrudan bir ilişki vardır. İnsan etkinliklerinin su, toprak, hava, biyolojik ve ekolojik kaynaklar üzerinde baskı yaratmaktadır. Bu ise çeşitli içeriklere sahip çevre sorunlarını gündeme ... -
Sivil toplum düşüncesinde kırılma noktası
(2007)Bu çalışma ile Ortaçağ kent devletlerinden bu yana geçen süreçte sivil toplum kavramının düşünsel temel taşları incelenmektedir. Sivil toplumun gelişme sürecinde kırılma noktası, Gramsci olarak kabul edilmiştir. Çünkü ... -
Abbasi Devletine Yönelik Ali Oğulları veya Şii Tehdidi
(2007)Ümeyye oğullarının düşüşünden sonra Abbasilerin ortaya çıkması, İslam tarihinin en önemli dönüm noktalarından birini oluşturur. Haşim oğullarının iki güçlü ailesi Ali oğulları ile Abbas oğulları, ortak hareket ederek Emevî ... -
Çorum Hasan Paşa İl Halk Kütüphanesi'nde bulunan Arap Dili ve belagatına dair yazmalar
(2007)Cumhuriyet'in kurulduğu yıllarda Çorum merkezde üç kütüphane vardı. Daha sonra bu kütüphaneler Çorum Hasan Paşa İl Halk Kütüphanesi adıyla tek çatı altında bütünleşmiştir. Bu çalışmada söz konusu bütünleşme sürecine ilişkin ... -
Sürdürülebilir Kalkınma ve Çevre Muhasebesi I
(2007)Ekoloji ile ekonomi arasında doğrudan bir ilişki vardır. İnsan etkinliklerinin su, toprak, hava, biyolojik ve ekolojik kaynaklar üzerinde baskı yaratmaktadır. Bu ise çeşitli içeriklere sahip çevre sorunlarını gündeme ... -
es-Semev'el b. Adiya'nın vefaya dair Lamiye Kasidesi
(2007)es-Semev'el b. Âdiyâ İslâm öncesi Arap toplumunda yaşamıştır. Ünlü Arap şairi İmru'u'l-Kays'în çağdaşıdır. Arap Edebiyatında "vefa kasidesi" ile meşhur olmuştur. Bu çalışmada onun vefa kasidesi, bu kasidenin tarihi arka ... -
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
Phase transitions in a high-chromium and medium-carbon steel
(2008)Investigation of phase transformations in a high-chromium and medium-carbon steel were carried out with scanning electron microscopy (SEM) and Mössbauer spectroscopy for different prior heat treatment conditions of studied ... -
Synthesis of {substituted-[(4-{[4-(carboxymethyl-carbamoyl)phenylimino] methyl}benzylidene)-amino]benzoylamino}carboxylic acids
(2008)Some novel derivatives of methotrexate like compounds 2a-f have been synthesized, using terephthalaldehyde, isophthalaldehyde, 4-aminobenzoic acid and amino acids (glycine, ?-alanine, L-glutamic acid). The structures of ... -
Experimental investigation of a cross-flow heat exchanger with wing-type vortex generators
(2008)In this study, heat and fluid flow in a plate-fin heat exchanger with wing-type convergent-divergent longitudinal vortex generators (CDLVGs) were studied experimentally. A cross-flow plate-type heat exchanger was designed ... -
Factors affecting the removal of aflatoxin M1 from food model by Lactobacillus and Bifidobacterium strains
(2008)This paper describes the ability of six dairy strains of Lactobacillus and Bifidobacterium to remove aflatoxin M1 (AFM1) from phosphate-buffered saline (PBS) and reconstituted milk. Bacteria were incubated in both PBS and ...
