Yazar "Kanca, Yusuf" için listeleme
-
A comparative study on the effects of different thermochemical coating techniques on corrosion resistance of STKM-13A steel
Günen, Ali; Kanca, Yusuf; Karahan, İsmail Hakkı; Karakaş, Mustafa Serdar; Gök, Mustafa Sabri; Kanca, Erdoğan; Çürük, Ahmet (Springer Boston, 2018)The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ... -
Çok duvarlı karbon nanotüp katkılı akrilamid/akrilik asit hibrit hidrojellerin mekanik ve tribolojik davranışlarının incelenmesi
Özdemir, Rabia (Hitit Üniversitesi, 2023)ÖZET Hidrojeller doğal hücre dışı matrisle benzer fiziksel özellikleri nedeniyle kıkırdak onarımı uygulamalarında büyük ilgi çekmektedir. Fakat hidrojellerin zayıf mekanik özellikleri kıkırdak onarımındaki uygulamalarını ... -
Grafen- Si3N4 takviyeli titanyum hibrit kompozitlerin tribolojik özelliklerinin incelenmesi
Bilici, Halil İbrahim (Hitit Üniversitesi, 2023)Ti-6Al-4V (Ti64) alaşımı, düşük yoğunluk, yüksek mukavemet ve biyouyumluluk gibi özelliklere sahip olması ile özellikle medikal alanda en çok tercih edilen alaşımlarından birisi olmasına rağmen düşük sertlik ve aşınma ... -
High temperature wear behavior of the surface-modified externally cooled rolls
Günen, Ali; Kanca, Erdoğan; Karakaş, Mustafa Serdar; Koç, Vahdettin; Gök, Mustafa Sabri; Kanca, Yusuf; Çürük, Ahmet; Demir, Mehmet (Elsevier B.V., 2018)Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ... -
Hydrophobic surface modification and characterization of melamine foam
Okutan, Merve; Boran, Filiz; Ergün, Ayça; Kanca, Yusuf; Özkahraman, Bengi; Deligöz, Hüseyin (TUBİTAK, 2023)Abstract: Superhydrophobic and oleophilic modification of commercial acoustic melamine foam (MF) was made in this study. The modification was carried out with chitosan (CHI) and silica particles (SiO2 ), by using both a ... -
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
Gunen, Ali; Karahan, Ismail Hakki; Karakas, Mustafa Serdar; Kurt, Bulent; Kanca, Yusuf; Cay, Vedat Veli; Yildiz, Murat (Korean Inst Metals Materials, 2020)In this study, the surface of AISI H13 steel was borided with powder blends of B4C and NaBF(4)using the powder-pack method at 800, 900 and 1000 degrees C for 2, 4 and 6 h. The structural and mechanical characteristics of ... -
Properties and tribologic behavior of titanium carbide coatings on AISI D2 steel deposited by thermoreactive diffusion
Kurt, Bülent; Günen, Ali; Kanca, Yusuf; Koç, Vahdettin; Gök, Mustafa Sabri; Kırar, Ersan; Askerov, Khangardash (Minerals, Metals and Materials Society, 2018)In the present study, the metallographic, mechanical and tribologic behaviors of AISI D2 steel specimens coated with TiC through the titanizing process were investigated. The titanizing treatment was performed at the ... -
Tribological evaluation of biomedical polycarbonate urethanes against articular cartilage
Kanca, Yusuf; Milner, Piers; Dini, Daniele; Amis, Andrew A. (Elsevier Science Bv, 2018)This research investigated the in-vitro wear and friction performance of polycarbonate urethane (PCU) 80A as they interact with articular cartilage, using a customised multidirectional pin-on-plate tester. Condyles were ... -
Tribological properties of PVA/PVP blend hydrogels against articular cartilage
Kanca, Yusuf; Milner, Piers; Dini, Daniele; Amis, Andrew A. (Elsevier Science Bv, 2018)This research investigated in-vitro tribological performance of the articulation of cartilage-on-polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) blend hydrogels using a custom-designed multi-directional wear rig. ...
