Dil "eng" Mühendislik Fakültesi için listeleme
Toplam kayıt 494, listelenen: 101-120
-
Determination of the effects of flaxseed (Linum usitatissimum L.) sprouts powder on the gluten-free cupcake quality
(Wiley, 2021)In this study, germinated flaxseed sprouts powder (FSP) as plant-based gum alternative was produced and the effectiveness in gluten-free cupcake formulation at different levels was evaluated. The cupcake quality with FSP ... -
Development of a design for a crash energy management system for use in a railway passenger car
(SAGE Publications Ltd, 2016)A design approach for a crash energy management (CEM) system for a N13-type railway passenger car used by the Turkish State Railway Company is developed in this paper. The components of the CEM system are honeycomb-structured ... -
Dewatering of barite clay wastewater by inorganic coagulants and co-polymer flocculants
(Oficyna Wydawnicza Politechniki Wroclawskiej, 2015)This work is focused on dewatering of barite-containing clay waste from a barite beneficiation plant by coagulation and flocculation to enhance the dewatering rate and recycling of process water. A flocculation performance ... -
Dichromate and phosphate sorption capacity of bis formyl calix[4]arene on superparamagnetic iron oxide nanoparticles in aqueous phase
(Chemical Publishing Co., 2016)Calix[4]arene derivatives were added into aqueous phase phosphate and dichromate solutions in order to investigate sorption capacity at pH of 1.5 to 5.5. A 25 mg of polymers magnetic calix[4]arenes derivatives was added ... -
Dietary intake of sorbic and benzoic acids from tomato ketchup for adults and children in Turkey
(Birkhauser Verlag AG, 2015)This report aims to determine levels and dietary intake of sorbic and benzoic acids from tomato ketchup consumed in Turkey. During the period from September 2013 to October 2014, a total of 63 tomato ketchup samples were ... -
Dynamics of phase transformation in LiFePO4 in battery electrode
(International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, 2015)[No abstract available] -
The effect of 2D-MoS2 doped polypyrrole coatings on brass corrosion
(Elsevier B.V., 2020)Conductive polymers have an important potential against the corrosion applications because they arehighly resistant to chemicals besides they have homogeneous coating properties and transport metals tomore noble regions. ... -
Effect of aging at different temperatures on LAOS properties and secondary protein structure of hard wheat flour dough
(Academic Press, 2020)The effects of aging from t = 0–108 h at two different temperatures (4 and 25 °C) on the non-linear viscoelastic rheological properties and secondary protein structure of hard wheat flour dough (HWD) were investigated using ... -
The effect of aluminum and ammonium perchlorate content on temperature sensitivity, mechanical properties and performance of HTPB propellants
(The Japan Society for Aeronautical and Space Sciences, 2007)This paper describes the effect of aluminum content variation of HTPB (hydroxyl terminated polybutadiene) propellants on temperature sensitivity, mechanical properties and performance values. Aluminum (Al) content was ... -
The effect of anodization parameters on the formation of nanoporous TiO2 layers and their photocatalytic activities
(Elsevier B.V., 2014)In this work, nanoporous titanium dioxide (TiO2) layers were successfully formed by electrochemical anodization method on titanium (Ti) surface in fluorine containing electrolytes with different processing parameters. The ... -
Effect of attachment types and number of implants supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis
(Elsevier Ltd, 2015)The objective of this study was to calculate stresses in bone tissue surrounding uncoupled and splinted implants that are induced by a bite force applied to the mandible and to determine whether the number of mandibular ... -
The effect of ball type in fine particles grinding on kinetic breakage parameters
(Polish Mineral Engineering Society, 2015)In the study, the effect of different grinding media on breakage parameters was investigated. Ceramic and steel balls were used as the grinding media. It was observed that the grinding of ignimbrite obeyed first-order ... -
Effect of boiling point and density prediction methods on stochastic reconstruction
(American Chemical Society, 2018)Stochastic reconstruction (SR) methods are used to generate a series of molecules that mimic the properties of complex mixtures using partial analytical data. Determining a quantitative composition using these methods is ... -
Effect of carbon nanoparticles on the I V characteristics of dye doped nematic liquid crystal
(Czech Society of Chemical Engineering, 2014)[No abstract available] -
Effect of coating material on wear in internal gears
(Materials and Energy Research Center, 2017)Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards' wear formulation ... -
The Effect of Colemanite on Thermal Properties of Recycled Polyethylene
(Polish Acad Sciences Inst Physics, 2019)Boron is known as a rare and one of the most important elements for future engineering. Boron is naturally present in nature in the form of minerals, such as tincal, ulexite, colemanite, boracite, datolite and so on. Besides ... -
Effect of dephytinization by fermentation and hydrothermal autoclaving treatments on the antioxidant activity, dietary fiber, and phenolic content of oat bran
(American Chemical Society, 2017)Fermentation and hydrothermal methods were tested to reduce the phytic acid (PA) content of oat bran, and the effects of these methods on the dietary fiber (DF) and total phenolic (TP) contents as well as the antioxidant ... -
Effect of different palatal vault shapes on the dimensional stability of glass fiberreinforced heat-polymerized acrylic resin denture base material
(2012)Objective: The aim of this study was to determine the effect of different palatal vault shapes on the dimensional stability of a glass fiber reinforced heat polymerized acrylic resin denture base material. Methods: Three ... -
Effect of different resistant starch sources and wheat bran on dietary fibre content and in vitro glycaemic index values of cookies
(Academic Press, 2019)Cross-linked starches produced in lab-scale from corn and wheat starches with TDF contents of 80.4% and 83.6% were used in cookie formulation to obtain high fibre and low glycaemic index (GI) cookies. Different resistant ... -
Effect of electrolytic nickel coating on fatigue life of iron based powder metal parts
(2011)Electrolytic coating is one of the methods mainly used to provide corrosion resistance for the powder metal parts. The coatings have strong effects on mechanical properties of coated parts as well as on surface properties. ...
