Dil "eng" Mühendislik Fakültesi için listeleme
Toplam kayıt 494, listelenen: 141-160
-
The effects of ball filling and ball diameter on breakage kinetics of barite mineral
(Korza Matbaacilik, 2011)Barite is an industrial material that is used in many applications such as a filler in paint, paper and plastic, etc. In these industries, ultrafine grinding of barite mineral is generally needed. The absolute fineness of ... -
The effects of ball filling and ball diameter on kinetic breakage parameters of barite powder
(Elsevier, 2012)The absolute fineness of the ball diameter and the ball charge grading are important factors for the optimal operation of a ball mill. Therefore, the effects on breakage kinetics of the ball diameter and the fractional ... -
The effects of ball types on breakage parameters of barite
(Polish Mineral Engineering Society, 2014)Spherical balls are the dominant media shape used in the tumbling mills. However spherical balls wear into nonspherical fragments as a result of breakage due to impact and different wearing mechanisms inside the mill. Thus ... -
Effects of dopant rate and calcination parameters on photoluminescence emission of Y2O3:Eu3+ phosphors: A statistical approach
(Elsevier Sci Ltd, 2019)In this study, Y2O3:Eu3+ phosphorescent powders with different dopant rates were synthesized by sol-gel method. Statistical experimental design methods were used to investigate the effects of calcination temperature (800, ... -
Effects of flexural stiffness, axial velocity and internal support locations on translating beam's natural frequencies
(Trans Tech Publications, 2014)The aim of this paper is to examine the natural frequencies of beams for different flexural stiffness, internal simple support locations and axial moving speed. In the present investigation, the linear transverse vibrations ... -
Effects of holding force on the springback behavior of annealed aluminum plates
(Elsevier Ltd, 2016)Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing ... -
The Effects of iso-propanol and n-heptane Fuel Blends on HCCI combustion characteristics and engine performance
(2015)In this study, the effects of iso-propanol fuel blends were investigated on HCCI combustion and engine performance. The variations of cylinder pressure, heat release rate, start of combustion and engine performance were ... -
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ... -
Effects of mill speed on kinetic breakage parameters of four different particulate pumices
(Taylor and Francis, 2013)In this study, the effect of mill speed was investigated on different particulate pumice samples at batch grinding conditions based on a kinetic model. For this purpose, S i and B i,j equations were determined from the ... -
The Effects of Moisture Content and Coal Mixtures on the Grinding Behavior of Two Different Coals
(Taylor & Francis Inc, 2014)In this article, effects of moisture content and coal mixtures on grinding properties of the samples of two different fine coals, which were used in the Golta Cement Factory in Isparta (Turkey) were investigated. Grinding ... -
The Effects of Moisture Content and Coal Mixtures on the Grinding Behavior of Two Different Coals (vol 36, pg 292)
(Taylor & Francis Inc, 2014)[Abstract Not Available] -
Effects of Moisture Contents and Storage Temperatures on the Physical, Chemical and Microbiological Qualities of Non-Sulfitted Dried Apricots
(ANKARA UNIV, FAC AGR, 2022)This study was conducted to determine the changes in the physicochemical and microbiological qualities of the non-sulfited sun dried apricots (NSDAs) at three different moisture contents (MCs, 13.7, 23.5 and 27.0%) and at ... -
Effects of nitridation time and precursor particle size on yield of β-SiAlON synthesized from calcined kaolinite
(Springer New York LLC, 2019)Carbothermal reduction and simultaneous nitriding (CTRN) of natural aluminosilicates is a method used to obtain phases of Si–Al–O–N system. SiAlON phases have important applications, such as high technology ceramics, for ... -
The effects of powder filling on the kinetic breakage parameters of natural amorphous silica
(Taylor and Francis Inc., 2017)In this study, the effects of powder filling were investigated on natural amorphous silica at batch grinding conditions based on a kinetic model. For this purpose, first eight different mono-sized fractions were carried ... -
Effects of pretreatment and various operating parameters on permeate flux and quality during ultrafiltration of apple juice
(2012)The central composite design with a quadratic model was used to investigate the effect of temperature (20-40°C) and transmembrane pressure (TMP) (100-300kPa) as well as pretreatment with gelatin and bentonite (0:0-300:1500mgL ... -
Effects of probiotic bacteria on the bioaccessibility of aflatoxin B1 and ochratoxin A using an in vitro digestion model under fed conditions
(Taylor and Francis, 2009)In the present study, we aimed at determining the release of aflatoxin B1 (AFB1) and ochratoxin A (OTA) from different food products in the gastro-intestinal tract in the absence and presence of probiotics, a possible ... -
Effects of the alumina reinforcement ratio on the corrosion properties of iron based composite materials
(Carl Hanser Verlag, 2020)Iron based composite materials reinforced with various ceramic particles are used in operating conditions requiring features such as high hardness, strength and wear resistance. The composite materials may be subject to ... -
The effects of the median filter with different window sizes for ultrasound image
(Institute of Electrical and Electronics Engineers Inc., 2017)Ultrasound is widely used in medical imaging. Unfortunately, speckle noise decreases the quality of the ultrasound image. One of the filters to reduce speckle noise in ultrasound image is the median filter. The median ... -
Effects of two important parameters on capacity of a laboratory Jaw crusher of different coals: Choke feed level and effective reduction ration
(Taylor and Francis, 2011)In this study, the effects of three different choke feed level (1/1, 1/2, and 1/4) and four different effective reduction ratios (2.5, 5, 10, and 20) depend on the capacity of the crusher of the three different characteristic ... -
Effects of Water Soluble Materials on Water-in-oil Primary Food Emulsion Stability
(2019)Water-in-oil (w/o) primary food emulsions are often used for encapsulation of bioactive food ingredients or preparing multiple emulsions, however there is a lack of study about evaluation of stability of these emulsions ...