Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 559, listelenen: 221-240
-
Exergy destruction analysis of a gas turbine power plant
(Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2018)According to the data released by “Republic of Turkey-the Ministry of Energy and Nat ural Resources”, by the end of July 2017, 34% of the electricity of Turkey was produced from natural gas. As it is compared to ... -
Exergy transfer in a porous rectangular channel
(Elsevier Ltd, 2009)Present paper is performed to investigate the heat and exergy transfer characteristics of forced convection flow through a horizontal rectangular channel where open-cell metal foams of different pore densities such as 10, ... -
Exhaust gas analysis of an eight cylinder gasoline engine based on engine speed
(Elsevier Ltd, 2017)In this experimental work, exhaust gas analysis of an eight cylinder and v-type gasoline engine, namely, a Chevrolet 5.7, is experimentally performed in terms of engine speed at laboratory conditions by using of an exhaust ... -
Experimental and numerical analysis of low velocity impact on a preloaded composite plate
(Elsevier Ltd, 2015)An experimental and numerical study on the influence of biaxial preloading on the low velocity impact performance of E-glass/epoxy-laminated composite plates was conducted. For this aim, an experimental device was developed ... -
Experimental and numerical analysis of the splay impact on the performance of splayed cross-cut fin heat sink
(Elsevier France-Editions Scientifiques Medicales Elsevier, 2021)In this study, splayed effects on the thermal performance of standard cross-cut heat sink (S-CCHS), fixed-array splayed (FAS-CCHS), and full splayed (FS-CCHS) under natural and forced conditions are studied experimentally ... -
Experimental and numerical investigation of geometry effects on multiple impinging air jets
(Elsevier Ltd, 2014)The effect of jet geometry on the flow and the heat transfer characteristics was investigated experimentally and numerically for elliptic and rectangular impinging jet arrays. Detailed heat transfer measurements over a ... -
Experimental and numerical study of alumina reinforced aluminum matrix composites: Processing, microstructural aspects and properties
(Elsevier Ltd, 2016)Co-continuous alumina-aluminum composite materials with excellent physical and mechanical properties offer great potentials for lightweight, wear resistant, and high-temperature applications. They combine metallic properties ... -
Experimental and simulation study on structural characterization and hydrogen storage of metal organic structured compounds
(Elsevier Ltd, 2016)One of the barrier for common usage of hydrogen energy system is storing hydrogen efficiently. Especially for mobile applications, it is very important to store hydrogen in small spaces reversibly. Metal-organic framework ... -
Experimental investigation of a cross-flow heat exchanger with wing-type vortex generators
(2008)In this study, heat and fluid flow in a plate-fin heat exchanger with wing-type convergent-divergent longitudinal vortex generators (CDLVGs) were studied experimentally. A cross-flow plate-type heat exchanger was designed ... -
Experimental investigation of cooling performance a heat pump for near azeotropic refrigerant R404A
(Hitit University, 2017)In this study, in order to investigate the effect of outdoor air temperatures on the performance of an air source heat pump, operated in cooling mode, using R404A refrigerant, the heat pump was tested at the outdoor air ... -
An experimental investigation of heat transfer enhancement in a rectangular duct with plate fins
(2009)In this study, using an ideal heat exchanger model, a detailed evaluation of performance parameters in the turbulent regime for the enhancement of heat transfer by using winglet-type vortex generators is carried out. The ... -
Experimental investigation of heat transfer from different pin fin in a rectangular channel
(Taylor and Francis Ltd., 2018)In this study, the effect of both hexagonal pin fins (HPFs) and cylindrical pin fins (CPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally investigated. ... -
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ... -
Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs
(2012)Detailed heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array was investigated using thermal infrared camera. Both V-SR and CD-SR ... -
Experimental investigation of the axial crushing behavior of aluminum/CFRP hybrid tubes with circular-hole triggering mechanism
(ELSEVIER SCI LTD, 2023)The current study investigates the axial crushing behavior of filament-wound aluminum/carbon fiber reinforced plastic (Al/CFRP) hybrid tubes with circular-hole triggering mechanism. The proposed hybrid design consists of ... -
An experimental study on combustion, engine performance and exhaust emissions in a HCCI engine fuelled with diethyl ether-ethanol fuel blends
(Elsevier, 2016)In this study, the effects of diethyl ether–ethanol fuel blends on HCCI combustion, engine performance and exhaust emissions were investigated experimentally in a single cylinder, port injection HCCI engine. In the ... -
An experimental study on the compressive response of CFRP honeycombs with various cell configurations
(Elsevier Ltd, 2019)The experimental investigation on the compressive response of carbon fiber reinforced polymer (CFRP) honeycombs with various cell configurations was carried out in the present work. The CFRP honeycomb specimens were ... -
An experimental study on the effects of diesel and jet-A1 fuel blends on combustion, engine performance and exhaust emissions in a direct injection diesel engine
(Turkish Society for Thermal Science and Technology, 2016)In this study, an experimental investigation was performed in order to determine the effects of Jet-A1(A100), diesel fuel and Jet-A1/diesel fuel blends (A25, A50, A75) including 25% Jet-A1/75% diesel, 50% Jet-A1/50% diesel ... -
Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays
(2011)In this study, convective heat transfer and pressure drop in a cross-flow heat exchanger with hexagonal, square and circular (HSC) pin-fin arrays were studied experimentally. The pin-fins were arranged in an in-line manner. ... -
Extraction of soluble β-glucan from oat and barley fractions: Process efficiency and dispersion stability
(Academic Press, 2018)This study comprises laboratory-scale extraction of soluble ?-glucan (BG) from oat (16 and 32% BG) and barley (12 and 32% BG) fractions, investigation of chemical composition and stability of dispersions prepared from water ...