Kategori "Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı" Mühendislik Fakültesi İçin Listeleme
Toplam kayıt 64, listelenen: 41-60
-
Monitoring and control of PLC based motion control systems via device-net
(Institute of Electrical and Electronics Engineers Inc., 2014)The control of mechanical systems are generally applied by using electric motors which are useful for the control of velocity, position and torque. On the other hand, servo motors are preferred due to their characteristic ... -
Numerical investigation of amounts of heat, power and temperature distribution in IT-SOFC
(Electrochemical Society Inc., 2013)In this study, thermodynamic and heat transfer concepts were combined to understanding correlation of heat, power and temperature gradient on the cell. All of heat sources and amounts has been determined for electrolyte ... -
Performance investigation of an eight cylinder gasoline engine
(American Society of Mechanical Engineers (ASME), 2014)Performance investigation of a Chevrolet 5.7, eight cylinder gasoline engine is experimentally carried out at laboratuary conditions by means of the special softwares called "NetDyn" and "WinDyn". This experimental work ... -
Pesticide effect on kinetic properties of catalase enzyme
(Hitit Üniversitesi, 2017)Catalase is a metalloenzyme. Contains Cu(II) as the metal ion. It is a detoxification agent for the H2O2 compound and protects tissues and cells from oxidative damage [1]. Cryogels are synthetic materials generally used ... -
Physical properties of LLDPE and PP filled with wood flours
(American Society of Mechanical Engineers (ASME), 2015)In this study, composites of polypropylene (PP), as well as linear low density polyethylene (LLDPE) thermoplastics filled with wood flour have been investigated to study the effect of size and amount of wood flour on their ... -
Pore modification in porous ceramic membranes with sol-gel process and determination of gas permeability and selectivity
(2010)Summary: The aim of the study was to investigate the variation in total surface area, porosity, pore size, Knudsen and surface diffusion coefficients, gas permeability and selectivity before and after the application of ... -
Predicting energy absorption parameters of aluminum lattice structures filled tubes via artificial neural networks
(2019)In this paper, the energy absorption parameters of aluminum body centered cubic lattice structures filled thin-walled tubes under axial loading are predicted via artificial neural networks (ANNs). Different tube thickness, ... -
Preparation and properties of biodegradable food packing films from corn starch blending with hemicelluloses particles
(Czech Society of Chemical Engineering, 2014)[No abstract available] -
Preparation and swelling properties of zeolite-poly(2-hydroxyethyl methacrylate-co-acrylic acid) hydrogel composites
(Polish Academy of Sciences, 2016)Zeolite-Poly(2-hydroxyethyl methacrylate (HEMA)-co-acrylic acid (AA)) hydrogel composite materials were synthesized by in situ free radical addition polymerization technique. The swelling values obtained highly for the ... -
Problems of mining education at Turkish universities: past, present and future
(Elsevier Science Bv, 2015)In this paper, the history of modern mining engineering education at Turkish universities from 1924 until today is briefly explained. So far, the number of departments of mining engineering adds up to 28 and second program ... -
Quasi-static axial crushing behavior of thin-walled circular aluminum tubes with functionally graded thickness
(Elsevier Ltd, 2016)In this paper, the crushing behavior of circular aluminum thin-walled tubes with functionally graded thickness (FGT) are investigated experimentally. To this aim, three different thickness grading patterns are introduced ... -
Radar darbelerinin kümelenmesi için iki-aşamalı bir ayrıştırma tekniği
(Institute of Electrical and Electronics Engineers Inc., 2017)Darbe ayrıştırma alınan radar darbelerinin hangi kaynağa (vericiye) ait olduğunu belirleyen bir işlemdir. Darbe ayrıştırma teknikleri genel olarak darbelerin geliş zamanlarına göre aralık algoritmaları ve geliş açısı, ... -
Raspberry Pi ile açık kaynak kodlu IDS'lerin performans karşılaştırılması
(Institute of Electrical and Electronics Engineers Inc., 2019)Küçük ve orta ölçekli bilgisayar ağlarında ağ trafiğinin analizinde ve saldırı tespit aşamasında yüksek kapasiteli güvenlik duvarlarının yerine, gömülü mikro işlemcili donanımlar üzerinde açık kaynak kodlu saldırı tespit ... -
Raspberry pi ve snort ile SOHO networklerde bir güvenlik duvarı uygulaması
(Institute of Electrical and Electronics Engineers Inc., 2017)In small and home office (SOHO) computer networks, an intrusion detection system can be activated to intercept the possible attack. Network traffic analysis is the basis of attack detection methods. In the intrusion detection ... -
River water quality model verification through a GIS based software
(2009)Research and development attempts on water quality models created valuable resources in the sense of model calibration and verification techniques. Recognizing the current degree of pollution in rivers and the importance ... -
Size controllable synthesis and characterization of cuO nanostructure
(Trans Tech Publications Ltd, 2018)In this study, copper oxide (CuO) nanostructures were successfully prepared by adding EG (ethylene glycol) and PEG (4000, 8000) (polyethylene glycol) via an in-situ chemical precipitation method. EG and PEG (4000, 8000) ... -
Sno2/graphene nanocomposites with enhanced gas sensing performance
(Trans Tech Publications Ltd, 2018)Graphene-Tin Oxide (G-SnO2) nanocomposites in different morphology were synthesized using tin (II) chloride (SnCl2) and graphene Oxide (GO) via hydrothermal process in the presence of hydrazine and ammonia by adding ... -
Stress analysis of a rotating FGM circular disc with exponentially-varying properties
(2012)In this study, elastic stress analysis of a thin circular disc made of functionally graded materials (FGMs) subjected to a temperature load and an inertia force due to rotation of the disc is investigated. Based on the two ... -
Stress analysis of functionally graded disc under thermal and mechanical loads
(Elsevier Ltd, 2011)In this study, the elastic stress analysis of annular discs made of functionally graded materials (FGMs) subjected to both uniform pressures on the inner surface and a linearly decreasing temperature distribution has been ... -
Synthesis and characterization of modified diatomite-leaf-like cuO nanosheet composites
(Trans Tech Publications Ltd, 2018)In this work, firstly we described the effect of freeze drying on modification of raw diatomite. And then, modified diatomite-leaf-like copper oxide (CuO) nanosheet composite was successfully prepared by surfactant-free ...