Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 559, listelenen: 284-303
-
Immobilization of Aspergillus oryzae β-galactosidase on low-pressure plasma-modified cellulose acetate membrane using polyethyleneimine for production of galactooligosaccharide
(2010)The aim of this study was to produce galactooligosaccharides (GOS) from lactose using ?-galactosidase from Aspergillus oryzae immobilized on a low-pressure plasma-modified cellulose acetate (CA) membrane. Specifically, a ... -
Immobilization of Candida antarctica A and Thermomyces lanuginosus lipases on cotton terry cloth fibrils using polyethyleneimine
(2012)In this study, cotton terry cloth fibrils were coated with 0.2% polyethyleneimine (PEI). Lipases from Candida antarctica A (CALA) and Thermomyces lanuginosus (TL) were immobilized on this support through adsorption followed ... -
Impact response of sandwiches with open-cell casting metal foam and GFRP skins
(Taylor and Francis Ltd., 2016)The main advantage of using sandwich structures is their high strength, high energy absorbing capacity and high bending stiffness to weight ratio. Therefore, they are unique for the applications where the light-weight ... -
Impact response of waste poly ethylene terephthalate (PET) composite plate
(Springer New York LLC, 2017)Poly ethylene terephthalate (PET) is considered one of the most important engineering polymers for the last two decades due to its rapid growth of usage, aesthetic appearance, good light transmittance, and smooth surface. ... -
Improvements on deinterleaving of radar pulses in dynamically varying signal environments
(Elsevier Inc., 2017)An electronic support system receiver which is a passive receiver picks up an interleaved stream of pulses and extracts their pulse parameters. These parameters are sent to a deinterleaving subsystem which sorts them and ... -
In situ carbothermal reduction/nitridation carbon-nano powder added geopolymer composites
(American Ceramic Society, 2014)Geopolymer was prepared by mixing metakaolin (Al2O3 center dot SiO2) with sodium water glass solution and then the activated carbon nano powder was added the geopolymer. To determine the best composition for carbothermal ... -
Incidence and level of aflatoxin contamination in chilli commercialised in Turkey
(Elsevier Ltd, 2013)During the years 2011–2012, a total of 182 chilli samples were collected from two provinces of Turkey and checked for aflatoxins (AFs). The samples were analysed using immunoaffinity column (IAC) clean-up and high performance ... -
Influence of epoxy addition on the thermal, mechanical, and dielectrical properties of polycyanurate films
(John Wiley and Sons Inc., 2018)In the study, polycyanurate (PCN)/epoxy resin (ER) blends are prepared to enhance the physical properties of cyanate ester resins. The effects of curing schedule and blend composition on their thermal, mechanical, and ... -
The influence of freeze-thawing conditions on swelling and long-term stability properties of poly(vinyl alcohol) hydrogels for controlled drug release
(Springer, 2021)The preparation of poly(vinyl alcohol) (PVA) hydrogels was succeeded via the freeze-thawing (F/T) method by varying the synthesis parameter conditions. The swelling capacity and long-term stability of the hydrogels were ... -
Influence of interstitial filling on breakage kinetics of gypsum in ball mill
(Elsevier, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
Inhibition of ochratoxin A production of aspergillus carbonarius by yeast species
(2011)A total of 21 yeast strains isolated from wine-grapes of Turkey were screened for their ability to inhibit ochratoxin A (OTA) accumulation by Aspergillus carbonarius in both yeast extract sucrose (YES) broth and grape ... -
The inhibition of steel corrosion in acidic solutions by a new Schiff base
(Sociedad Chilena de Quimica, 2016)The inhibition effect of 2,2?- (((thiobis (4,1 phenylene)) bis(azanylylidene)) bis(methanylyidene)) bis(4-methoxyphenol) (BIS-IMIN) on the corrosion behavior of 304-stainless steel (SS) in 0.5 M HCl solution was studied ... -
Integrated definition modeling and Taguchi analysis of flexible manufacturing systems: Aircraft industry application
(2013)In this paper, flexible manufacturing systems (FMS) are studied. Firstly, an FMS design approach is proposed using integrated definition for function methodology. A systematic layout design and performance evaluation scheme ... -
Intelligent Lighting System Using Color-Based Image Processing for Object Detection in Robotic Handling Applications
(MDPI, 2024)Abstract: In applications reliant on image processing, the management of lighting holds significance for both precise object detection and efficient energy utilization. Conventionally, lighting control involves manual ... -
An interactive gis-based software for dynamic monitoring of rivers
(Scibulcom Ltd., 2014)Water quality research and development attempts have been the most valuable resources in the sense of model calibration and verification techniques. Due to the fact that current degree of pollution in rivers and importance ... -
Interrelationships between the bond grindability with physicomechanical and chemical properties of coals
(Taylor and Francis, 2013)In this research, different techniques for the estimation of Bond grindability (Gbg) values of coals are studied. Data from ten sub-bituminous coals from Turkey are used by featuring physicomechanical (ISI, Is, and FD) and ... -
An introduction to the traditional fermented foods and beverages of Turkey
(2011)Fermented foods and beverages,whether of plant or animal origin, play an important role in the diet of people in many parts of the world. Fermented foods not only provide important sources of nutrients but have also great ... -
Investigating the effect of electrolyte types with various ionic liquids on the electrochromic performance of PEDOT:PSS based LbL multilayers
(Elsevier, 2020)The objective of the study is to investigate the electrochromic performances of layer-by-layer (LbL) multilayered thin film electrode prepared from linear polyethylene imine (LPEI) and poly(3,4-ethylenediox-ythiophene):polystyrene ... -
Investigation and kinetic evaluation of furan formation in tomato paste and pulp during heating
(Elsevier Ltd, 2015)Due to its high ascorbic acid content and acidic environment, tomato is susceptible for furan formation during heat treatment. In this study, kinetics of furan formation was analyzed in order to have an understanding of ... -
Investigation of breakage behavior of different mineralogical and morphological characteristic pumices
(2011)The objective of this study is to analyze dry grinding behavior of four different pumices in terms of Bond grindability value, selection and breakage parameters values. For this purpose, firstly, Bond grindability test ...
