Ara
Toplam kayıt 246, listelenen: 71-80
Abrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes
(Springer New York LLC, 2016)
The effects of mixing method during powder metallurgy (PM) routes on the abrasive wear behavior of Al–Al2O3p composite materials is investigated. For this purpose, starting Al powders with a constant volume fraction of 10% ...
Effects of nitridation time and precursor particle size on yield of β-SiAlON synthesized from calcined kaolinite
(Springer New York LLC, 2019)
Carbothermal reduction and simultaneous nitriding (CTRN) of natural aluminosilicates is a method used to obtain phases of Si–Al–O–N system. SiAlON phases have important applications, such as high technology ceramics, for ...
Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches
(SAGE Publications Ltd, 2018)
Honeycomb sandwich structures are increasingly used in the automotive, aerospace and shipbuilding industries where fuel savings, increase in load carrying capacity, vehicle safety and decrease in gas emissions are very ...
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)
In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ...
Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs
(2012)
The flow field of smooth surfaces and surfaces with V-shaped ribs (V-SR) was studied experimentally with a Laser-Doppler Anemometry (LDA) system. In addition, heat transfer characteristics were experimentally investigated. ...
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)
Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ...
Experimental and numerical investigation of geometry effects on multiple impinging air jets
(Elsevier Ltd, 2014)
The effect of jet geometry on the flow and the heat transfer characteristics was investigated experimentally and numerically for elliptic and rectangular impinging jet arrays. Detailed heat transfer measurements over a ...
Flow and heat transfer characteristics of transverse perforated ribs under impingement jets
(2013)
An experimental study was conducted to investigate heat transfer and flow characteristics under impingement of a multiple circular jet array with perforated rib surfaces (PRS) and solid rib surfaces (SRS). Heat transfer ...
Sandwiched graphene-fullerene composite: A novel 3-D nanostructured material for hydrogen storage
(Elsevier Ltd, 2016)
The main objective of this paper is to investigate hydrogen storage capacity of a novel carbon based nanoporous material composition that is built up by covalently sandwiched fullerene units between parallel graphene sheets. ...
Combined experimental and theoretical investigation of characterization and hydrogen storage properties of Zn(II) based complex and composites
(Elsevier Ltd, 2015)
Metal organic structured coordination complex was synthesized by using Zn(II), 1,10 Phenantroline and teraphtalic acid building blocks. Then the synthesized compound have been characterized with Ft-IR, TGA/DTA/DrTGA, EA, ...