Ara
Toplam kayıt 25, listelenen: 1-10
Detection of aflatoxin M1 in milk and dairy products consumed in Adana, Turkey
(Society of Dairy Technology, 2009)
A total of 70 dairy products consisting of 20 sterilized milk, 10 butter, 20 white cheese and 20 Kashar cheese samples were analysed for aflatoxin M 1(AFM1) by enzyme-linked immunosorbent assay (ELISA). The detection limit ...
Irreversibility analysis of a vapor compression cascade refrigeration cycle
(2009)
Hydrocarbon based energy sources such as coal, oil and natural gas have been diminishing in an increasing speed. Instead of finding alternative energy sources, we have to use the available sources more effectively. By means ...
Determination of noise level of a gas-fired pulse combustor
(2007)
Experimental determination of noise level of a Helmholtz type gas-fired pulse combustor is presented. During the tests, the tail pipe length was varied from 1.9 m to 1.3 m by 10 cm intervals. Noise level measurements were ...
Investigation of irreversibilities in the compression process for alternative refrigerants in a vapor compression refrigeration cycle
(2008)
Irreversibility analyses during compression process are presented for some refrigerants namely, R290, R134a, R12, R22, and R152a in a vapor compression refrigeration cycle. The effects of evaporator temperature, condenser ...
Acoustic analysis of a liquefied petroleum gas-fired pulse combustor
(2008)
Experimental investigation of acoustic characteristics of a Helmholtz type liquefied petroleum gas-fired pulse combustor is presented. In the experiments, the length of the tail pipe was changed from 1.9 m to 1.3 m by 10 ...
Residual stress analysis and expansion of plastic zone in simple supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2006)
In this study, a residual stress analysis is carried out on symmetric and antisymmetric cross-ply and angleply thermoplastic simple supported laminated plates for transverse loading. Low density polyethylene thermoplastic ...
Comparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828-EPIKURE 3090 and DURATEK KLM 606a-DURATEK KLM 606b
(2007)
The aim of the study is to determine the optimum cure temperatures and kinetics for two different epoxy resin systems without using solvent. Two resin systems consist of EPIKOTE 828® epoxy resin-EPIKURE® 3090 polyamidoamine ...
Residual stress analysis snd expansion of plastic zone in simple supported and clamped supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2007)
In this study, a residual stress analysis is carried out on symmetric cross-ply and angle-ply thermoplastic simple supported and clamped supported laminated plates for transverse loading. Low density polyethylene thermoplastic ...
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)
In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ...
Residual stress analysis of aluminum metal matrix composite laminated plates with a square hole
(2009)
Metal matrix composites provide new materials with superior properties. They give high strength and stiffness. In this study, a stainless steel reinforced aluminum metal matrix laminated simple supported plate with a square ...