Ara
Toplam kayıt 43, listelenen: 11-20
Abrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes
(Springer New York LLC, 2016)
The effects of mixing method during powder metallurgy (PM) routes on the abrasive wear behavior of Al–Al2O3p composite materials is investigated. For this purpose, starting Al powders with a constant volume fraction of 10% ...
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)
In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ...
Sandwiched graphene-fullerene composite: A novel 3-D nanostructured material for hydrogen storage
(Elsevier Ltd, 2016)
The main objective of this paper is to investigate hydrogen storage capacity of a novel carbon based nanoporous material composition that is built up by covalently sandwiched fullerene units between parallel graphene sheets. ...
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)
This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ...
Forchheimer forced convection in a rectangular channel partially filled with aluminum foam
(Elsevier Inc., 2016)
In this paper, heat transfer and pressure drop were investigated by placing open-cell aluminum foam in different ratios according to the channel volume in a hydrodynamically fully developed rectangular channel. Aluminum ...
Partial dealcoholization of red wine by nanofiltration and its effect on anthocyanin and resveratrol levels
(SAGE Publications Inc., 2016)
The present work studies the use of nanofiltration for the production of red wine concentrate with low alcohol content. Factorial design was applied to measure the influences of transmembrane pressure (10-20 bar) and ...
Fibrous polymer-grafted chitosan/clay composite beads as a carrier for immobilization of papain and its usability for mercury elimination
(Springer Verlag, 2016)
Papain, which is an industrially important enzyme, has been immobilized on fibrous polymer-modified composite beads, namely poly(methacrylic acid)-grafted chitosan/clay. Characterization studies have been done using FTIR ...
A numerical study on the effects of EGR and spark timing to combustion characteristics and NOx emission of a GDI engine
(Taylor and Francis Inc., 2016)
EGR is one of the most significant strategies for reducing especially nitrogen oxides (NOx) emissions from internal combustion engines. The thermal efficiency of spark ignition engines is lower than compression ignition ...
Toward a universal method for preparing molecularly imprinted polymer nanoparticles with antibody-like affinity for proteins
(American Chemical Society, 2016)
We describe a potentially universal, simple and cheap method to prepare water-compatible molecularly imprinted polymer nanoparticles (MIP-NPs) as synthetic antibodies against proteins. The strategy is based on a solid phase ...
Investigation of hole effects on the critical buckling load of laminated composite plates
(Institute of Metals Technology, 2016)
In this study, the effects of the hole diameter on the buckling behavior of glass-fiber-reinforced, laminated composite rectangular plates were investigated both experimentally and numerically. As the test specimens, ...