Ara
Toplam kayıt 291, listelenen: 61-70
Production of water-resistant briquettes from a mixture of an imported bituminous coal and a Turkish lignite with copolymer binder
(Taylor and Francis, 2013)
In this study, low-quality Denizli-Kale lignite was mixed with a high-quality imported (Siberian) bituminous coal, and optimum briquetting conditions were investigated with a copolymer (Mowilith-VDM©) binder. In the ...
Effects of two important parameters on capacity of a laboratory Jaw crusher of different coals: Choke feed level and effective reduction ration
(Taylor and Francis, 2011)
In this study, the effects of three different choke feed level (1/1, 1/2, and 1/4) and four different effective reduction ratios (2.5, 5, 10, and 20) depend on the capacity of the crusher of the three different characteristic ...
Numerical investigation of amounts of heat, power and temperature distribution in IT-SOFC
(Electrochemical Society Inc., 2013)
In this study, thermodynamic and heat transfer concepts were combined to understanding correlation of heat, power and temperature gradient on the cell. All of heat sources and amounts has been determined for electrolyte ...
Aflatoxins and ochratoxin A in chocolate products in Turkey
(Taylor and Francis Ltd., 2019)
This survey describes the occurrence and levels of AFs and OTA in chocolate products consumed in Turkey. A total of 130 samples, including bitter chocolate, milk chocolate and chocolate wafers were analysed for these ...
The thermodynamic stability of intermediate solid solutions in LiFePO4 nanoparticles
(Royal Society of Chemistry, 2016)
Theoretical predictions from first principles and recent advances in in situ electrochemical characterization techniques have confirmed the presence of solid-solution states during electrochemical (de)lithiation of LiFePO4 ...
Particle-size and morphology dependence of the preferred interface orientation in LiFePO4 nano-particles
(Royal Society of Chemistry, 2014)
We gain new insights into the equilibrium properties and potential two-phase lithiation mechanisms in LiFePO4 nano-particles by conducting a first-principles investigation of the anisotropic chemical interfacial energy ...
Thermal-stress analysis of ceramic laminate veneer restorations with different incisal preparations using micro-computed tomography-based 3D finite element models
(Elsevier Ltd, 2017)
Main objective of this study is to investigate the thermal behavior of ceramic laminate veneer restorations of the maxillary central incisor with different incisal preparations such as butt joint and palatinal chamfer using ...
Modified ultrasound despeckling assessment index for the Field II simulated cyst image
(Institution of Engineering and Technology, 2017)
Various methods have been proposed to reduce speckle noise, which decreases image quality in ultrasound images. The Field II simulated cyst image consists of three classes and is used to compare a proposed despeckle filter ...
Microstructural properties of particle-reinforced polytetrafluoroethylene composite bearings after wear
(Springer New York LLC, 2015)
High-performance engineering polymers that ensure the desired properties of journal bearings and give good wear results are investigated. We determine the microstructural properties of polymer-based particle-reinforced ...
Yeast Identification During Fermentation of Turkish Gemlik Olives
(Blackwell Publishing Inc., 2018)
Abstract: Naturally fermented black table olives of the Gemlik variety are one of the most consumed fermented products in Turkey. The objective of this work was to identify yeast strains isolated during their natural ...