Ara
Toplam kayıt 299, listelenen: 111-120
Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs
(2012)
Detailed heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array was investigated using thermal infrared camera. Both V-SR and CD-SR ...
Pore modification in porous ceramic membranes with sol-gel process and determination of gas permeability and selectivity
(2010)
Summary: The aim of the study was to investigate the variation in total surface area, porosity, pore size, Knudsen and surface diffusion coefficients, gas permeability and selectivity before and after the application of ...
Abrasive wear, structure, and mechanical aspects of Al–Al2O3 composites fabricated using various mixing media during P/M routes
(Springer New York LLC, 2016)
The effects of mixing method during powder metallurgy (PM) routes on the abrasive wear behavior of Al–Al2O3p composite materials is investigated. For this purpose, starting Al powders with a constant volume fraction of 10% ...
Effects of nitridation time and precursor particle size on yield of β-SiAlON synthesized from calcined kaolinite
(Springer New York LLC, 2019)
Carbothermal reduction and simultaneous nitriding (CTRN) of natural aluminosilicates is a method used to obtain phases of Si–Al–O–N system. SiAlON phases have important applications, such as high technology ceramics, for ...
Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches
(SAGE Publications Ltd, 2018)
Honeycomb sandwich structures are increasingly used in the automotive, aerospace and shipbuilding industries where fuel savings, increase in load carrying capacity, vehicle safety and decrease in gas emissions are very ...
Evaluation of environmental wastes in building material
(2013)
In this study, it was produced composite material by using environmental waste sources of Turkey in brick clay. It was selected Resadiye Clay as main material and boron waste of Kütahya-Emet Boron Works, fly ash of Seyitömer ...
Design process model for flexible manufacturing systems and application of TAI
(2011)
In this paper, a systematic design process model is proposed to model Flexible Manufacturing Systems (FMS). Generally, FMS systems design is complicated and cost very high as installation phase. Therefore, technical analysis ...
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)
In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ...
Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs
(2012)
The flow field of smooth surfaces and surfaces with V-shaped ribs (V-SR) was studied experimentally with a Laser-Doppler Anemometry (LDA) system. In addition, heat transfer characteristics were experimentally investigated. ...
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)
Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ...