Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorErdin, Muhammed Emin
dc.contributor.authorAtmaca, Alper
dc.date.accessioned2019-05-13T09:07:16Z
dc.date.available2019-05-13T09:07:16Z
dc.date.issued2016
dc.identifier.citationErdin, M. E., Atmaca, A. (2016). Effects of holding force on the springback behavior of annealed aluminum plates. Procedia Engineering, 149, 56-61.en_US
dc.identifier.issn1877-7058
dc.identifier.urihttps://doi.org/10.1016/j.proeng.2016.06.638
dc.identifier.urihttps://hdl.handle.net/11491/1764
dc.descriptionInternational Conference on Manufacturing Engineering and Materials, ICMEM 2016, 6 June 2016 through 10 June 2016,en_US
dc.description.abstractTypical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing machine with 60° V-bending mold. Various holding forces (2.25 kN which is slightly higher than the required force for bending operation, 5 kN, 10 kN and 15 kN) were applied at the end of the bending processes to investigate the hardening effect on springback values. The test results showed that annealing decreases springback values in all anisotropy directions. It is also clear from the test data that application of holding force has a significant affirmative effect on springback values. © 2016 The Authors. Published by Elsevier ltd.en_US
dc.language.isoeng
dc.publisherElsevier Ltden_US
dc.relation.isversionof10.1016/j.proeng.2016.06.638en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)*
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectAnnealingen_US
dc.subjectHolding Forceen_US
dc.subjectSpringbacken_US
dc.subjectV-Bendingen_US
dc.titleEffects of holding force on the springback behavior of annealed aluminum platesen_US
dc.typeconferenceObjecten_US
dc.relation.journalProcedia Engineeringen_US
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.authorid0000-0002-9274-3674en_US
dc.identifier.volume149en_US
dc.identifier.startpage56en_US
dc.identifier.endpage61en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster

info:eu-repo/semantics/openAccess
Aksi belirtilmediği sürece bu öğenin lisansı: info:eu-repo/semantics/openAccess