Ara
Toplam kayıt 62, listelenen: 11-20
Theoretical and experimental investigation of wear in internal gears
(2014)
Internal gears are commonly used in automotive and aeronautic industries as external sun gears of planetary mechanisms. Internal gears have some advantages such as low sliding velocities, low contact stresses, high contact ...
Tensile behavior of heat welded CNT network structures
(Elsevier, 2014)
In this study, a computational investigation on the mechanical properties of random carbon nanotube (CNT) networks is reported. For this purpose, atomistic models of 3-D CNT network structures are generated by an automated ...
Predicting microstructure evolution during directed energy deposition additive manufacturing of Ti-6Al-4V
(American Society of Mechanical Engineers (ASME), 2018)
Laser engineering net shaping (LENS) is one of the representative processes of directed energy deposition (DED) in which a moving heat source having high-intensity melts and fuses metal powders together to print parts. The ...
Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs
(2012)
Detailed heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array was investigated using thermal infrared camera. Both V-SR and CD-SR ...
Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches
(SAGE Publications Ltd, 2018)
Honeycomb sandwich structures are increasingly used in the automotive, aerospace and shipbuilding industries where fuel savings, increase in load carrying capacity, vehicle safety and decrease in gas emissions are very ...
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)
In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ...
Velocity field and turbulence effects on heat transfer characteristics from surfaces with V-shaped ribs
(2012)
The flow field of smooth surfaces and surfaces with V-shaped ribs (V-SR) was studied experimentally with a Laser-Doppler Anemometry (LDA) system. In addition, heat transfer characteristics were experimentally investigated. ...
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)
Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ...
Experimental and numerical investigation of geometry effects on multiple impinging air jets
(Elsevier Ltd, 2014)
The effect of jet geometry on the flow and the heat transfer characteristics was investigated experimentally and numerically for elliptic and rectangular impinging jet arrays. Detailed heat transfer measurements over a ...
Flow and heat transfer characteristics of transverse perforated ribs under impingement jets
(2013)
An experimental study was conducted to investigate heat transfer and flow characteristics under impingement of a multiple circular jet array with perforated rib surfaces (PRS) and solid rib surfaces (SRS). Heat transfer ...