Ara
Toplam kayıt 85, listelenen: 11-20
Nonlinear vibrations of spring-supported axially moving string
(Kluwer Academic Publishers, 2015)
In this study, multi-supported axially moving string is discussed. Supports located at the ends of the string are simple supports. A support located in the middle section owns the features of a spring. String speed is ...
Thermal-stress analysis of ceramic laminate veneer restorations with different incisal preparations using micro-computed tomography-based 3D finite element models
(Elsevier Ltd, 2017)
Main objective of this study is to investigate the thermal behavior of ceramic laminate veneer restorations of the maxillary central incisor with different incisal preparations such as butt joint and palatinal chamfer using ...
Exergy analysis of R1234yf and R1234ze as R134a replacements in a two evaporator vapour compression refrigeration system
(Elsevier Ltd, 2015)
Exergy analysis is a useful way for determining the real thermodynamic losses and optimising environmental and economic performance in the systems such as vapour compression refrigeration systems. The present study deals ...
Residual stress analysis snd expansion of plastic zone in simple supported and clamped supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2007)
In this study, a residual stress analysis is carried out on symmetric cross-ply and angle-ply thermoplastic simple supported and clamped supported laminated plates for transverse loading. Low density polyethylene thermoplastic ...
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)
In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ...
Residual stress analysis of aluminum metal matrix composite laminated plates with a square hole
(2009)
Metal matrix composites provide new materials with superior properties. They give high strength and stiffness. In this study, a stainless steel reinforced aluminum metal matrix laminated simple supported plate with a square ...
Theoretical and experimental investigation of wear in internal gears
(2014)
Internal gears are commonly used in automotive and aeronautic industries as external sun gears of planetary mechanisms. Internal gears have some advantages such as low sliding velocities, low contact stresses, high contact ...
Tensile behavior of heat welded CNT network structures
(Elsevier, 2014)
In this study, a computational investigation on the mechanical properties of random carbon nanotube (CNT) networks is reported. For this purpose, atomistic models of 3-D CNT network structures are generated by an automated ...
An experimental investigation of heat transfer enhancement in a rectangular duct with plate fins
(2009)
In this study, using an ideal heat exchanger model, a detailed evaluation of performance parameters in the turbulent regime for the enhancement of heat transfer by using winglet-type vortex generators is carried out. The ...
Predicting microstructure evolution during directed energy deposition additive manufacturing of Ti-6Al-4V
(American Society of Mechanical Engineers (ASME), 2018)
Laser engineering net shaping (LENS) is one of the representative processes of directed energy deposition (DED) in which a moving heat source having high-intensity melts and fuses metal powders together to print parts. The ...