Ara
Toplam kayıt 12, listelenen: 1-10
Heat transfer characteristics of longitudinal perforated and unperforated ribs under impingement jets
(American Society of Mechanical Engineers (ASME), 2014)
Impingement heat transfer is considered as heat transfer enhancement technique. Impinging jets are used in many applications where high heat transfer rates are required. An experimental study was conducted to investigate ...
Investigation of the effect of temperature on the mechanical properties of E-Glass fiber reinforced composites
(The Composites and Advanced Materials Expo (CAMX), 2014)
In this study, mechanical characterization of E-Glass fiber reinforced composite materials that are manufactured via Vacuum Infusion (VI) (a.k.a Vacuum Assisted Resin Transfer Molding (VARTM)) is investigated. The mechanical ...
Performance investigation of an eight cylinder gasoline engine
(American Society of Mechanical Engineers (ASME), 2014)
Performance investigation of a Chevrolet 5.7, eight cylinder gasoline engine is experimentally carried out at laboratuary conditions by means of the special softwares called "NetDyn" and "WinDyn". This experimental work ...
Monitoring and control of PLC based motion control systems via device-net
(Institute of Electrical and Electronics Engineers Inc., 2014)
The control of mechanical systems are generally applied by using electric motors which are useful for the control of velocity, position and torque. On the other hand, servo motors are preferred due to their characteristic ...
A novel two-part interconnector for solid oxide fuel cells
(John Wiley and Sons Ltd, 2014)
A two-part interconnector is developed for solid oxide fuel cell stacks to reduce cost and to improve sealing. The novel interconnector involves a metallic core for current collection and gas distribution and a ceramic ...
Theoretical and experimental investigation of wear in internal gears
(2014)
Internal gears are commonly used in automotive and aeronautic industries as external sun gears of planetary mechanisms. Internal gears have some advantages such as low sliding velocities, low contact stresses, high contact ...
Tensile behavior of heat welded CNT network structures
(Elsevier, 2014)
In this study, a computational investigation on the mechanical properties of random carbon nanotube (CNT) networks is reported. For this purpose, atomistic models of 3-D CNT network structures are generated by an automated ...
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)
Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ...
Experimental and numerical investigation of geometry effects on multiple impinging air jets
(Elsevier Ltd, 2014)
The effect of jet geometry on the flow and the heat transfer characteristics was investigated experimentally and numerically for elliptic and rectangular impinging jet arrays. Detailed heat transfer measurements over a ...
Effects of flexural stiffness, axial velocity and internal support locations on translating beam's natural frequencies
(Trans Tech Publications, 2014)
The aim of this paper is to examine the natural frequencies of beams for different flexural stiffness, internal simple support locations and axial moving speed. In the present investigation, the linear transverse vibrations ...