Ara
Toplam kayıt 13, listelenen: 1-10
Impact response of sandwiches with open-cell casting metal foam and GFRP skins
(Taylor and Francis Ltd., 2016)
The main advantage of using sandwich structures is their high strength, high energy absorbing capacity and high bending stiffness to weight ratio. Therefore, they are unique for the applications where the light-weight ...
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)
In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ...
Sandwiched graphene-fullerene composite: A novel 3-D nanostructured material for hydrogen storage
(Elsevier Ltd, 2016)
The main objective of this paper is to investigate hydrogen storage capacity of a novel carbon based nanoporous material composition that is built up by covalently sandwiched fullerene units between parallel graphene sheets. ...
Forchheimer forced convection in a rectangular channel partially filled with aluminum foam
(Elsevier Inc., 2016)
In this paper, heat transfer and pressure drop were investigated by placing open-cell aluminum foam in different ratios according to the channel volume in a hydrodynamically fully developed rectangular channel. Aluminum ...
Investigation of hole effects on the critical buckling load of laminated composite plates
(Institute of Metals Technology, 2016)
In this study, the effects of the hole diameter on the buckling behavior of glass-fiber-reinforced, laminated composite rectangular plates were investigated both experimentally and numerically. As the test specimens, ...
Experimental and numerical study of alumina reinforced aluminum matrix composites: Processing, microstructural aspects and properties
(Elsevier Ltd, 2016)
Co-continuous alumina-aluminum composite materials with excellent physical and mechanical properties offer great potentials for lightweight, wear resistant, and high-temperature applications. They combine metallic properties ...
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
(Elsevier Ltd, 2016)
An experimental and numerical analysis of the influence of impactor shapes on the low velocity impact performance of aluminium sandwich composite plates has been carried out. The aluminium composite panels were manufactured ...
Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
(Taylor and Francis Ltd., 2016)
In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi ...
Role of adhesion in sandpaper failure progression
(Elsevier Ltd, 2016)
In this study, different grit sizes of sandpapers were used under controlled rubbing experiments using a rheometer to investigate the role of adhesion in failure progression by particulate separation. Frictional shear ...
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)
Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ...