Ara
Toplam kayıt 13, listelenen: 1-10
Exhaust gas analysis of an eight cylinder gasoline engine based on engine speed
(Elsevier Ltd, 2017)
In this experimental work, exhaust gas analysis of an eight cylinder and v-type gasoline engine, namely, a Chevrolet 5.7, is experimentally performed in terms of engine speed at laboratory conditions by using of an exhaust ...
Design of hybrid composites from scrap aluminum reinforced with (SiC+TiO2+Gr+Ti+B)
(Springer New York LLC, 2017)
Hybrid Metal Matrix Composites (HMMCs) have very light weight, high strength, and show better resistance to corrosion, oxidation, and wear. Impact resistance is an especially important property of these HMMCs which is ...
Effect of coating material on wear in internal gears
(Materials and Energy Research Center, 2017)
Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards' wear formulation ...
A monitoring and control system integrated with smart phones for the efficient use of underground water resources in agricultural product growing
(Hitit University, 2017)
Monitoring and control system is very important for crop development process in agriculture zones. A structure which is carried out based on the type of the product with the knowledge of temperature and humidity values of ...
Experimental investigation of cooling performance a heat pump for near azeotropic refrigerant R404A
(Hitit University, 2017)
In this study, in order to investigate the effect of outdoor air temperatures on the performance of an air source heat pump, operated in cooling mode, using R404A refrigerant, the heat pump was tested at the outdoor air ...
Analysis of scoring resistance on coated spur gears by considering surface roughness
(Hitit University, 2017)
With the rise of velocity and momentum in machines as a result of technological developments, on gears, alongside refraction from the bottom of the gears and pitting formation, and scoring formation has showed up. In the ...
A novel two-layered glass-ceramic sealant design for solid oxide fuel cells
(John Wiley and Sons Ltd, 2017)
A thermo-mechanical stress develops on the sealant of an solid oxide fuel cell (SOFC) stack because of thermal expansion coefficient (TEC) differences among ceramic electrolyte, metallic interconnector, and glass-ceramic ...
Thermal-stress analysis of ceramic laminate veneer restorations with different incisal preparations using micro-computed tomography-based 3D finite element models
(Elsevier Ltd, 2017)
Main objective of this study is to investigate the thermal behavior of ceramic laminate veneer restorations of the maxillary central incisor with different incisal preparations such as butt joint and palatinal chamfer using ...
Worldwide trends on encapsulation of phase change materials: A bibliometric analysis (1990–2015)
(Elsevier Ltd, 2017)
Context Science is not static! In light of this basic approach, it can be expressed clearly that bibliometric methods or analysis has become an indispensable guide to be draw scientific and technological roadmaps in their ...
Numerical investigation of heat transfer using impinging jets on triangular and square ribbed roughened walls
(Turkish Society for Thermal Science and Technology, 2017)
This paper presents a heat removal study on triangular and square ribbed surfaces under an array of impinging air jets. The investigation was carried out using nozzles with a 7x3 rectangular array of circular jets. The ...