Ara
Toplam kayıt 15, listelenen: 1-10
Design of hybrid composites from scrap aluminum reinforced with (SiC+TiO2+Gr+Ti+B)
(Springer New York LLC, 2017)
Hybrid Metal Matrix Composites (HMMCs) have very light weight, high strength, and show better resistance to corrosion, oxidation, and wear. Impact resistance is an especially important property of these HMMCs which is ...
Heat transfer characteristics of longitudinal perforated and unperforated ribs under impingement jets
(American Society of Mechanical Engineers (ASME), 2014)
Impingement heat transfer is considered as heat transfer enhancement technique. Impinging jets are used in many applications where high heat transfer rates are required. An experimental study was conducted to investigate ...
Investigation of the effect of temperature on the mechanical properties of E-Glass fiber reinforced composites
(The Composites and Advanced Materials Expo (CAMX), 2014)
In this study, mechanical characterization of E-Glass fiber reinforced composite materials that are manufactured via Vacuum Infusion (VI) (a.k.a Vacuum Assisted Resin Transfer Molding (VARTM)) is investigated. The mechanical ...
Physical properties of LLDPE and PP filled with wood flours
(American Society of Mechanical Engineers (ASME), 2015)
In this study, composites of polypropylene (PP), as well as linear low density polyethylene (LLDPE) thermoplastics filled with wood flour have been investigated to study the effect of size and amount of wood flour on their ...
Energy and exergy analysis of an air conditioning system using the mixture of outdoor and return air
(2012)
Energy and exergy analysis of the air conditioning systems employing the mixture of outdoor and return air (ACOR) are presented. The equations of heat transfer rate and exergy destruction are developed for ACOR according ...
Stress analysis of a rotating FGM circular disc with exponentially-varying properties
(2012)
In this study, elastic stress analysis of a thin circular disc made of functionally graded materials (FGMs) subjected to a temperature load and an inertia force due to rotation of the disc is investigated. Based on the two ...
Investigation of experimental research on the low velocity impact damage behavior of NCF composite plates - Complas XII
(2013)
In this study an experimental investigation is performed on the impact response of non-crimp fabric composite plates at room temperature. Chopped strand mat combi is used as reinforcing material and two kinds of matrix; ...
Performance investigation of an eight cylinder gasoline engine
(American Society of Mechanical Engineers (ASME), 2014)
Performance investigation of a Chevrolet 5.7, eight cylinder gasoline engine is experimentally carried out at laboratuary conditions by means of the special softwares called "NetDyn" and "WinDyn". This experimental work ...
Monitoring and control of PLC based motion control systems via device-net
(Institute of Electrical and Electronics Engineers Inc., 2014)
The control of mechanical systems are generally applied by using electric motors which are useful for the control of velocity, position and torque. On the other hand, servo motors are preferred due to their characteristic ...
Low velocity impact response of glass fiber reinforced aluminium foam sandwich
(European Conference on Composite Materials, ECCM, 2012)
The aim of this study was the analysis of the bending and the low - velocity impact response of aluminium foam sandwich reinforced by the outer skins made of glass fiber reinforced epoxy matrix and the results were compared ...