Başlık için Kimya Mühendisliği Bölümü listeleme
Toplam kayıt 150, listelenen: 122-141
-
Recognition of lysozyme using surface imprinted bacterial cellulose nanofibers
(Taylor and Francis Inc., 2017)Here, we developed the lysozyme imprinted bacterial cellulose (Lyz-MIP/BC) nanofibers via the surface imprinting strategy that was designed to recognize lysozyme. This study includes the molecular imprinting method onto ... -
The removal of acid violet 90 from aqueous solutions using PANI and PANI/clinoptilolite composites: Isotherm and kinetics
(Springer New York LLC, 2018)Polyaniline (PANI) and polyaniline/Gördes-clinoptilolite (PANI/GC) composite materials were synthesized by the chemical oxidative polymerization technique and used in the adsorption of Acid Violet 90 metal-complex dye (AV ... -
Removal of Diazo Dye Direct Red 28 and Tetra Azo Dye Direct Black 22 Using Synthesized Magnetic Kaolin Supported Zinc Ferrite
(SLOVENSKO KEMIJSKO DRUSTVO, 2022)The presence of dye molecules in water resources has harmful effects on environment. Therefore, it is important to remove dyes from wastewater using eco-friendly materials. In this study, adsorptive removal of diazo dye ... -
Removal of Methyl Violet 2B and Direct Black 22 from Single and Binary System Using a Magnetic Zeolite/MgO/Starch/Fe3O4 Nanocomposite
(SLOVENSKO KEMIJSKO DRUSTVO, 2024)This study focuses on the preparation and characterization of magnetic zeolite (FSM-Zeo) using starch, magnesium oxide, and Fe3O4. Various analyses, including BET, FTIR, SEM, EDS, XRD, Zeta potential, and VSM, were conducted ... -
River water quality model verification through a GIS based software
(2009)Research and development attempts on water quality models created valuable resources in the sense of model calibration and verification techniques. Recognizing the current degree of pollution in rivers and the importance ... -
Role of NaCl in NaBH4 production and its hydrolysis
(2013)This study explains completely feasible route to synthesize NaBH 4 by means of mechano-chemical reaction, in which NaCl, B 2O3 and MgH2 were utilized. Optimum reaction conditions were investigated by different values of ... -
Size controllable synthesis and characterization of cuO nanostructure
(Trans Tech Publications Ltd, 2018)In this study, copper oxide (CuO) nanostructures were successfully prepared by adding EG (ethylene glycol) and PEG (4000, 8000) (polyethylene glycol) via an in-situ chemical precipitation method. EG and PEG (4000, 8000) ... -
Smart glass electrochromic device fabrication of uniform tungsten oxide films from its powder synthesized by solution combustion method
(Elsevier, 2019)Recently, there has been renewed interest in tungsten oxide based electrochromic (EC) materials. A variety of studies related to these materials have been reported, however, no serious studies so far have been reported on ... -
Sno2/graphene nanocomposites with enhanced gas sensing performance
(Trans Tech Publications Ltd, 2018)Graphene-Tin Oxide (G-SnO2) nanocomposites in different morphology were synthesized using tin (II) chloride (SnCl2) and graphene Oxide (GO) via hydrothermal process in the presence of hydrazine and ammonia by adding ... -
Sol-jel yöntemiyle üretilen alümina alkojelin fizikokimyasal ve yapısal özellikleri üzerine kurutma türünün etkisi
(Gazi Üniversitesi, 2020)Üstün termal ve mekanik özellikleri sebebiyle başta uzay teknolojisi olmak üzere pek çok alanda kullanılmakta olan alkojeller, düşük yoğunluğa ve yüksek gözenekliliğe sahip süper yalıtkan ve çevre dostu malzemeler olarak ... -
Solid phase synthesis of anhydrous zinc borate from zinc and boron oxide and utilization as a flame retardant in dye and textile
(Gazi University, 2014)Durability of materials against flame and stability at high temperatures are very important in order to increase the field of use. Non-flammability is not the only requirement; these materials should not have toxic gas ... -
Sonocatalytic treatment of baker’s yeast effluent
(IWA Publishing, 2017)Baker’s yeast effluent is a major source of pollution with a high organic load and dark colour. It can be treated by using advanced oxidation processes (AOPs). AOPs, such as ultrasonic irradiation, are ambient temperature ... -
Surface imprinted bacterial cellulose nanofibers for hemoglobin purification
(Elsevier B.V., 2017)There is a significant need for the development of the novel adsorbents in the field of protein purification. In this study, thin hemoglobin imprinted film (MIP) was fabricated onto the bacterial cellulose nanofibers’ ... -
Synthesis and Characterization of Chitosan/Polyvinylpyrrolidone/Zeolite Composite by Solution Blending Method
(Springer New York LLC, 2014)Polymer/clay composites have been studied for several decades; in the study, polymer/zeolite composite beads have been prepared by a simple solution blending method using chitosan, polyvinylpyrrolidone and zeolite particles ... -
Synthesis and characterization of modified diatomite-leaf-like cuO nanosheet composites
(Trans Tech Publications Ltd, 2018)In this work, firstly we described the effect of freeze drying on modification of raw diatomite. And then, modified diatomite-leaf-like copper oxide (CuO) nanosheet composite was successfully prepared by surfactant-free ... -
Synthesis and characterization of poly(o-toluidine)/kaolinite conductive composites for humidity and temperature sensing
(2018)Conductive poly(o-toluidine)/kaolinite composite was synthesized via chemical polymerization of o-toluidine in the availability of kaolinite using ammonium persulfate as oxidizing agent. To investigate the use of the ... -
Synthesis and photophysicochemical studies of poly(ethylene glycol) conjugated symmetrical and asymmetrical zinc phthalocyanines
(Elsevier, 2015)Synthesis and characterization of poly(ethylene glycol) conjugated symmetrical and asymmetrical zinc phthalocyanines (ZnPcs) is described. Copper (I) catalyzed azide-alkyne cycloaddition (CuAAC) click reaction between azide ... -
Synthesis of APTES and alcohol modified Sn/SBA-15 in presence of competitive ion: Test in degradation of Remazol Yellow
(Elsevier Ltd, 2022)Sn/SBA-15s were prepared hydrothermally either disolving metals in EA (ethyl alcohol) or/and APTES (3-aminopropyl triethoxysilane) modification of TEOS (tetraethyl ortosilicate) under aluminum competition. Proposed synthesis ... -
Synthesis of chitosan-based hydrogels as a novel drug release device for wound healing
(Hitit University, 2017)The development of the porous, biocompatible and biodegradable hydrogels has been gaining much attention for wound dressing applications. The hydrogels prepared using freeze-thawing method present important properties ... -
Synthesis of novel Schiff Bases containing acryloyl moiety and the investigation of spectroscopic and electrochemical properties
(Elsevier B.V., 2016)A novel Schiff bases and their acryloyl derivatives were synthesized through the reaction of p-hydroxybenzaldehyde in order of with aniline, p-chloroaniline, p-nitroaniline, p-methylaniline and p-aminobenzoic acid. The ...
