Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 108, listelenen: 47-66
-
Experimental investigation of a cross-flow heat exchanger with wing-type vortex generators
(2008)In this study, heat and fluid flow in a plate-fin heat exchanger with wing-type convergent-divergent longitudinal vortex generators (CDLVGs) were studied experimentally. A cross-flow plate-type heat exchanger was designed ... -
Experimental investigation of cooling performance a heat pump for near azeotropic refrigerant R404A
(Hitit University, 2017)In this study, in order to investigate the effect of outdoor air temperatures on the performance of an air source heat pump, operated in cooling mode, using R404A refrigerant, the heat pump was tested at the outdoor air ... -
An experimental investigation of heat transfer enhancement in a rectangular duct with plate fins
(2009)In this study, using an ideal heat exchanger model, a detailed evaluation of performance parameters in the turbulent regime for the enhancement of heat transfer by using winglet-type vortex generators is carried out. The ... -
Experimental investigation of heat transfer from different pin fin in a rectangular channel
(Taylor and Francis Ltd., 2018)In this study, the effect of both hexagonal pin fins (HPFs) and cylindrical pin fins (CPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally investigated. ... -
Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
(Elsevier Ltd, 2014)Both new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal ... -
Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs
(2012)Detailed heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array was investigated using thermal infrared camera. Both V-SR and CD-SR ... -
Experimental investigation of the axial crushing behavior of aluminum/CFRP hybrid tubes with circular-hole triggering mechanism
(ELSEVIER SCI LTD, 2023)The current study investigates the axial crushing behavior of filament-wound aluminum/carbon fiber reinforced plastic (Al/CFRP) hybrid tubes with circular-hole triggering mechanism. The proposed hybrid design consists of ... -
An experimental study on the compressive response of CFRP honeycombs with various cell configurations
(Elsevier Ltd, 2019)The experimental investigation on the compressive response of carbon fiber reinforced polymer (CFRP) honeycombs with various cell configurations was carried out in the present work. The CFRP honeycomb specimens were ... -
Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays
(2011)In this study, convective heat transfer and pressure drop in a cross-flow heat exchanger with hexagonal, square and circular (HSC) pin-fin arrays were studied experimentally. The pin-fins were arranged in an in-line manner. ... -
Failure analysis of graphene sheets with multiple Stone-Thrower-Wales defects using molecular mechanics based nonlinear finite element models
(Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2018-06-09)Experimental studies show that Stone-Thrower-Wales (STW) defects generally exist in graphene sheets (GSs) and these defects considerably affect the fracture strength of GSs. Thus, prediction of failure modes of GSs with ... -
Farklı soğutucular kullanarak CPU'nun ısı boruları ile soğutulması
(Türk Isı Bilimi Ve Tekniği Derneği, 2009)Bu çalışma, bilgisayarların soğutulmasında ısı borularının etkin kullanılması ile ilgili yapılan teorik bir çalışmadır. Soğutucu akışkan ısı kaynağından (Central Processing Unit – CPU’dan) ısıyı absorbe eder. Evaporatörde ... -
Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths
(SAGE Publications Ltd, 2015)The joining techniques of lightweight and strong materials in the transport industry (e.g. automotive, aerospace, shipbuilding industries) are very important for the safety of the entire structure. In these industries, ... -
Flow and heat transfer characteristics of transverse perforated ribs under impingement jets
(2013)An experimental study was conducted to investigate heat transfer and flow characteristics under impingement of a multiple circular jet array with perforated rib surfaces (PRS) and solid rib surfaces (SRS). Heat transfer ... -
Forchheimer forced convection in a rectangular channel partially filled with aluminum foam
(Elsevier Inc., 2016)In this paper, heat transfer and pressure drop were investigated by placing open-cell aluminum foam in different ratios according to the channel volume in a hydrodynamically fully developed rectangular channel. Aluminum ... -
A fully coupled thermal–microstructural–mechanical finite element processmodel for directed energy deposition additive manufacturing of Ti–6Al–4V
(TAYLOR & FRANCIS LTD, 2023)A fully coupled thermal–microstructural–mechanical finite element modelling framework is developed to investigate the distortion and residual stresses during directed energy deposition (DED) of multi-phase Ti–6Al–4V alloy. ... -
Grand canonical Monte Carlo simulations of methane adsorption in fullerene pillared graphene nanocomposites
(Elsevier Science Inc, 2021)The objective of this study is to investigate the methane adsorption performance of fullerene pillared graphene nanocomposites (FPGNs) with adjustable micro and meso porous morphology and high surface/weight ratios. Different ... -
Heat transfer augmentation by swirl generators inserted into a tube with constant heat flux
(2009)A novel conical injector type swirl generator (CITSG) is devised in this study. Performances of heat transfer and pressure drop in a pipe with the CITSG are experimentally examined for the CITSGs' angle (α) of 30°, 45° and ... -
Heat transfer characteristics of longitudinal perforated and unperforated ribs under impingement jets
(American Society of Mechanical Engineers (ASME), 2014)Impingement heat transfer is considered as heat transfer enhancement technique. Impinging jets are used in many applications where high heat transfer rates are required. An experimental study was conducted to investigate ... -
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier B.V., 2018)Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ... -
Hydrogen storage in heat welded random CNT network structures
(Elsevier Ltd, 2015)The objective of this study is to investigate hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures. To achieve this objective, different three-dimensional random CNT network structures ...