Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 108, listelenen: 72-91
-
Li-doped fullerene pillared graphene nanocomposites for enhancing hydrogen storage: A computational study
(Elsevier, 2021)Hydrogen physisorption in lithium doped fullerene pillared graphene nanocomposites (Li-FPGNs) having tunable pore structures were examined under different temperature and pressure conditions via grand canonical Monte Carlo ... -
A monitoring and control system integrated with smart phones for the efficient use of underground water resources in agricultural product growing
(Hitit University, 2017)Monitoring and control system is very important for crop development process in agriculture zones. A structure which is carried out based on the type of the product with the knowledge of temperature and humidity values of ... -
Monte Carlo simulations of hydrogen adsorption in fullerene pillared graphene nanocomposites
(Taylor & Francis Ltd, 2020)The objective of this study is to investigate the hydrogen storage performances of three-dimensional periodic fullerene pillared graphene nanocomposites (FPGNs) consisting of covalently bonded fullerene units between ... -
Multi-objective crashworthiness optimization of lattice structure filled thin-walled tubes
(Elsevier Ltd, 2020)Thin-walled tubes have been mostly used in passive vehicle safety systems as crash energy absorber. With the use of additive manufacturing technology, it is possible to produce novel filler materials to further enhance the ... -
Multiple objective crashworthiness optimization of circular tubes with functionally graded thickness via artificial neural networks and genetic algorithms
(SAGE Publications Ltd, 2017)The objective of this paper is to develop a multiple objective optimization procedure for crashworthiness optimization of circular tubes having functionally graded thickness. The proposed optimization approach is based on ... -
Nonlinear vibrations of spring-supported axially moving string
(Kluwer Academic Publishers, 2015)In this study, multi-supported axially moving string is discussed. Supports located at the ends of the string are simple supports. A support located in the middle section owns the features of a spring. String speed is ... -
A novel two-layered glass-ceramic sealant design for solid oxide fuel cells
(John Wiley and Sons Ltd, 2017)A thermo-mechanical stress develops on the sealant of an solid oxide fuel cell (SOFC) stack because of thermal expansion coefficient (TEC) differences among ceramic electrolyte, metallic interconnector, and glass-ceramic ... -
A novel two-part interconnector for solid oxide fuel cells
(John Wiley and Sons Ltd, 2014)A two-part interconnector is developed for solid oxide fuel cell stacks to reduce cost and to improve sealing. The novel interconnector involves a metallic core for current collection and gas distribution and a ceramic ... -
Numerical analysis of a commercial display cabinet with air curtain
(2011)Maintaining food temperatures below critical values is the important maximising the high quality display life of chilled foods. Air curtains are especially used in stores and retailer supermarkets as barrier systems to ... -
Numerical investigation of heat transfer using impinging jets on triangular and square ribbed roughened walls
(Turkish Society for Thermal Science and Technology, 2017)This paper presents a heat removal study on triangular and square ribbed surfaces under an array of impinging air jets. The investigation was carried out using nozzles with a 7x3 rectangular array of circular jets. The ... -
Optimal design of truss structures using weighted superposition attraction algorithm
(Springer, 2020)In this paper, a recently developed swarm based metaheuristic algorithm called weighted superposition attraction (WSA) is implemented for sizing optimization of truss structures first time in literature. The WSA algorithm ... -
Predicting microstructure evolution during directed energy deposition additive manufacturing of Ti-6Al-4V
(American Society of Mechanical Engineers (ASME), 2018)Laser engineering net shaping (LENS) is one of the representative processes of directed energy deposition (DED) in which a moving heat source having high-intensity melts and fuses metal powders together to print parts. The ... -
Prediction model for the impact response of glass fibre reinforced aluminium foam sandwiches
(Elsevier Ltd, 2015)The use of sandwich structures combines low weight with high energy absorbing capacity, so they are suitable for applications in the transport industry (automotive, aerospace, shipbuilding industry), where the "lightweight ... -
A process-microstructure finite element simulation framework for predicting phase transformations and microhardness for directed energy deposition of Ti6Al4V
(Elsevier, 2020)This paper presents a process-microstructure finite element modeling framework for predicting the evolution of volumetric phase fractions and microhardness during laser directed energy deposition (DED) additive manufacturing ... -
Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite
(Blackwell Publishing Inc., 2014)In this study, Al-2011 alloyed and Al2O3 particle-reinforced metal matrix composite (MMCs) were produced by using the Vortex method. Immediately after pouring composite to the mold and before full solidification, the ... -
Properties and tribologic behavior of titanium carbide coatings on AISI D2 steel deposited by thermoreactive diffusion
(Minerals, Metals and Materials Society, 2018)In the present study, the metallographic, mechanical and tribologic behaviors of AISI D2 steel specimens coated with TiC through the titanizing process were investigated. The titanizing treatment was performed at the ... -
Residual stress analysis and expansion of plastic zone in simple supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2006)In this study, a residual stress analysis is carried out on symmetric and antisymmetric cross-ply and angleply thermoplastic simple supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
Residual stress analysis of aluminum metal matrix composite laminated plates with a square hole
(2009)Metal matrix composites provide new materials with superior properties. They give high strength and stiffness. In this study, a stainless steel reinforced aluminum metal matrix laminated simple supported plate with a square ... -
Residual stress analysis snd expansion of plastic zone in simple supported and clamped supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2007)In this study, a residual stress analysis is carried out on symmetric cross-ply and angle-ply thermoplastic simple supported and clamped supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
Role of adhesion in sandpaper failure progression
(Elsevier Ltd, 2016)In this study, different grit sizes of sandpapers were used under controlled rubbing experiments using a rheometer to investigate the role of adhesion in failure progression by particulate separation. Frictional shear ...