Browsing Makale Koleksiyonu by Issue Date
Now showing items 1-20 of 109
-
Residual stress analysis and expansion of plastic zone in simple supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2006)In this study, a residual stress analysis is carried out on symmetric and antisymmetric cross-ply and angleply thermoplastic simple supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
Residual stress analysis snd expansion of plastic zone in simple supported and clamped supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2007)In this study, a residual stress analysis is carried out on symmetric cross-ply and angle-ply thermoplastic simple supported and clamped supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ... -
Acoustic analysis of a liquefied petroleum gas-fired pulse combustor
(2008)Experimental investigation of acoustic characteristics of a Helmholtz type liquefied petroleum gas-fired pulse combustor is presented. In the experiments, the length of the tail pipe was changed from 1.9 m to 1.3 m by 10 ... -
Experimental investigation of a cross-flow heat exchanger with wing-type vortex generators
(2008)In this study, heat and fluid flow in a plate-fin heat exchanger with wing-type convergent-divergent longitudinal vortex generators (CDLVGs) were studied experimentally. A cross-flow plate-type heat exchanger was designed ... -
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
Farklı soğutucular kullanarak CPU'nun ısı boruları ile soğutulması
(Türk Isı Bilimi Ve Tekniği Derneği, 2009)Bu çalışma, bilgisayarların soğutulmasında ısı borularının etkin kullanılması ile ilgili yapılan teorik bir çalışmadır. Soğutucu akışkan ısı kaynağından (Central Processing Unit – CPU’dan) ısıyı absorbe eder. Evaporatörde ... -
Residual stress analysis of aluminum metal matrix composite laminated plates with a square hole
(2009)Metal matrix composites provide new materials with superior properties. They give high strength and stiffness. In this study, a stainless steel reinforced aluminum metal matrix laminated simple supported plate with a square ... -
An experimental investigation of heat transfer enhancement in a rectangular duct with plate fins
(2009)In this study, using an ideal heat exchanger model, a detailed evaluation of performance parameters in the turbulent regime for the enhancement of heat transfer by using winglet-type vortex generators is carried out. The ... -
Exergy transfer in a porous rectangular channel
(Elsevier Ltd, 2009)Present paper is performed to investigate the heat and exergy transfer characteristics of forced convection flow through a horizontal rectangular channel where open-cell metal foams of different pore densities such as 10, ... -
Sizing problem for a cross flow heat exchanger with wing-type vortex generator
(2009)In the present study, sizing of a single pass cross flow heat exchanger with unmixed fluid streams has been investigated. The heat exchanger is a cross flow heat exchanger. It has overall dimensions of 20 × 20 × 20 cm. Two ... -
Heat transfer augmentation by swirl generators inserted into a tube with constant heat flux
(2009)A novel conical injector type swirl generator (CITSG) is devised in this study. Performances of heat transfer and pressure drop in a pipe with the CITSG are experimentally examined for the CITSGs' angle (α) of 30°, 45° and ... -
Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator
(Elsevier Ltd, 2010)In this paper a second law analysis of a cross-flow heat exchanger (HX) is studied in the presence of a balance between the entropy generation due to heat transfer and fluid friction. The entropy generation in a cross-flow ... -
Energy and irreversibility analysis of a cascade refrigeration system for various refrigerant couples
(2010)This study deals with energy and irreversibility analysis of a cascade refrigeration system employing various refrigerant couples, namely R152a–R23, R290–R23, R507–R23, R234a–R23, R717–R23 and R404a–R23, using a computer ... -
An elastic-plastic and residual stress analysis steel reinforced thermoplastic composite cantilever beam
(2010)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
Exergy analysis of coil-spring turbulators inserted in the horizontal concentric tubes
(2010)In this study, to obtain definitive information about the effects of spring-type turbulators located in the inner pipe of a concentric heat exchanger, the rates of exergy transfer Nusselt number (Nue) and exergy loss (E*) ... -
Elektro-erozyon ile işlemede işleme haznesine uygulanan titreşimlerin işleme performansına etkilerinin incelenmesi
(2011)Bu çalısmada, elektro-erozyon ile islemede (EEİ), isleme kosullarında isleme haznesine uygulanan titresimlerin performans çıktıları (isparçası isleme hızı, elektrot asınma hızı, bağıl asınma ve isparçası yüzey pürüzlülüğü) ... -
Comparison of superheating effect of water as a refrigerant with the other refrigerants
(2011)The performance comparison of water as a refrigerant (R718) with some refrigerants including R717, R290, R134a, and R152a is presented for a vapor compression refrigeration cycle. A computer program simulating the vapor ... -
Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays
(2011)In this study, convective heat transfer and pressure drop in a cross-flow heat exchanger with hexagonal, square and circular (HSC) pin-fin arrays were studied experimentally. The pin-fins were arranged in an in-line manner. ... -
Transient turbulent flow and heat transfer phenomena in plate-fin type cross-flow heat exchanger
(2011)In this article, a transient performance of a plate-fin cross-flow heat exchanger with convergent-divergent longitudinal vortex generators is investigated. The effect of flow geometry is taken into account to analyze the ...
