Ara
Toplam kayıt 92, listelenen: 51-60
An experimental study on the compressive response of CFRP honeycombs with various cell configurations
(Elsevier Ltd, 2019)
The experimental investigation on the compressive response of carbon fiber reinforced polymer (CFRP) honeycombs with various cell configurations was carried out in the present work. The CFRP honeycomb specimens were ...
Effect of different palatal vault shapes on the dimensional stability of glass fiberreinforced heat-polymerized acrylic resin denture base material
(2012)
Objective: The aim of this study was to determine the effect of different palatal vault shapes on the dimensional stability of a glass fiber reinforced heat polymerized acrylic resin denture base material. Methods: Three ...
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier B.V., 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)
In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ...
Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
(Taylor and Francis Ltd., 2016)
In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi ...
Transient turbulent flow and heat transfer phenomena in plate-fin type cross-flow heat exchanger
(2011)
In this article, a transient performance of a plate-fin cross-flow heat exchanger with convergent-divergent longitudinal vortex generators is investigated. The effect of flow geometry is taken into account to analyze the ...
Role of adhesion in sandpaper failure progression
(Elsevier Ltd, 2016)
In this study, different grit sizes of sandpapers were used under controlled rubbing experiments using a rheometer to investigate the role of adhesion in failure progression by particulate separation. Frictional shear ...
Heat transfer augmentation by swirl generators inserted into a tube with constant heat flux
(2009)
A novel conical injector type swirl generator (CITSG) is devised in this study. Performances of heat transfer and pressure drop in a pipe with the CITSG are experimentally examined for the CITSGs' angle (α) of 30°, 45° and ...
Effect of attachment types and number of implants supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis
(Elsevier Ltd, 2015)
The objective of this study was to calculate stresses in bone tissue surrounding uncoupled and splinted implants that are induced by a bite force applied to the mandible and to determine whether the number of mandibular ...
Energy and irreversibility analysis of a cascade refrigeration system for various refrigerant couples
(2010)
This study deals with energy and irreversibility analysis of a cascade refrigeration system employing various refrigerant couples, namely R152a–R23, R290–R23, R507–R23, R234a–R23, R717–R23 and R404a–R23, using a computer ...