Güncel Gönderiler: Makale Koleksiyonu
Toplam kayıt 109, listelenen: 61-80
-
Fatigue behavior of adhesively bonded glass fiber reinforced plastic composites with different overlap lengths
(SAGE Publications Ltd, 2015)The joining techniques of lightweight and strong materials in the transport industry (e.g. automotive, aerospace, shipbuilding industries) are very important for the safety of the entire structure. In these industries, ... -
Multiple objective crashworthiness optimization of circular tubes with functionally graded thickness via artificial neural networks and genetic algorithms
(SAGE Publications Ltd, 2017)The objective of this paper is to develop a multiple objective optimization procedure for crashworthiness optimization of circular tubes having functionally graded thickness. The proposed optimization approach is based on ... -
Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin-fin arrays
(2011)In this study, convective heat transfer and pressure drop in a cross-flow heat exchanger with hexagonal, square and circular (HSC) pin-fin arrays were studied experimentally. The pin-fins were arranged in an in-line manner. ... -
Sizing problem for a cross flow heat exchanger with wing-type vortex generator
(2009)In the present study, sizing of a single pass cross flow heat exchanger with unmixed fluid streams has been investigated. The heat exchanger is a cross flow heat exchanger. It has overall dimensions of 20 × 20 × 20 cm. Two ... -
Tensile behavior of heat welded CNT network structures
(Elsevier, 2014)In this study, a computational investigation on the mechanical properties of random carbon nanotube (CNT) networks is reported. For this purpose, atomistic models of 3-D CNT network structures are generated by an automated ... -
Forchheimer forced convection in a rectangular channel partially filled with aluminum foam
(Elsevier Inc., 2016)In this paper, heat transfer and pressure drop were investigated by placing open-cell aluminum foam in different ratios according to the channel volume in a hydrodynamically fully developed rectangular channel. Aluminum ... -
Effect of swirl generator inserted into a tube on exergy transfer: Decaying flow
(Taylor and Francis Inc., 2014)This study experimentally investigates the effect of conical injector type swirl generator inserts on heat and exergy transfer in a uniform heat flux tube for turbulence regime. One hundred twenty watts of heat are applied ... -
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ... -
Experimental investigation of heat transfer from different pin fin in a rectangular channel
(Taylor and Francis Ltd., 2018)In this study, the effect of both hexagonal pin fins (HPFs) and cylindrical pin fins (CPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally investigated. ... -
Heat transfer augmentation by swirl generators inserted into a tube with constant heat flux
(2009)A novel conical injector type swirl generator (CITSG) is devised in this study. Performances of heat transfer and pressure drop in a pipe with the CITSG are experimentally examined for the CITSGs' angle (α) of 30°, 45° and ... -
Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite
(Blackwell Publishing Inc., 2014)In this study, Al-2011 alloyed and Al2O3 particle-reinforced metal matrix composite (MMCs) were produced by using the Vortex method. Immediately after pouring composite to the mold and before full solidification, the ... -
Residual stress analysis snd expansion of plastic zone in simple supported and clamped supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2007)In this study, a residual stress analysis is carried out on symmetric cross-ply and angle-ply thermoplastic simple supported and clamped supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ... -
Residual stress analysis of aluminum metal matrix composite laminated plates with a square hole
(2009)Metal matrix composites provide new materials with superior properties. They give high strength and stiffness. In this study, a stainless steel reinforced aluminum metal matrix laminated simple supported plate with a square ... -
Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator
(Elsevier Ltd, 2010)In this paper a second law analysis of a cross-flow heat exchanger (HX) is studied in the presence of a balance between the entropy generation due to heat transfer and fluid friction. The entropy generation in a cross-flow ... -
Exergy transfer in a porous rectangular channel
(Elsevier Ltd, 2009)Present paper is performed to investigate the heat and exergy transfer characteristics of forced convection flow through a horizontal rectangular channel where open-cell metal foams of different pore densities such as 10, ... -
Sandwiched graphene-fullerene composite: A novel 3-D nanostructured material for hydrogen storage
(Elsevier Ltd, 2016)The main objective of this paper is to investigate hydrogen storage capacity of a novel carbon based nanoporous material composition that is built up by covalently sandwiched fullerene units between parallel graphene sheets. ... -
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ... -
Hydrogen storage in heat welded random CNT network structures
(Elsevier Ltd, 2015)The objective of this study is to investigate hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures. To achieve this objective, different three-dimensional random CNT network structures ... -
Assessment of an IGCC based trigeneration system for power, hydrogen and synthesis fuel production
(Elsevier Ltd, 2016)In this study, an integrated gasification combined cycle based trigeneration system is proposed to produce power, hydrogen and various Fischer-Tropsch (FT) synthesis products. The proposed plant consists of an (a) air ...
