Başlık için Polimer Mühendisliği Bölümü listeleme
Toplam kayıt 83, listelenen: 39-58
-
Grand canonical Monte Carlo simulations of methane adsorption in fullerene pillared graphene nanocomposites
(Elsevier Science Inc, 2021)The objective of this study is to investigate the methane adsorption performance of fullerene pillared graphene nanocomposites (FPGNs) with adjustable micro and meso porous morphology and high surface/weight ratios. Different ... -
Hydrophobic surface modification and characterization of melamine foam
(TUBİTAK, 2023)Abstract: Superhydrophobic and oleophilic modification of commercial acoustic melamine foam (MF) was made in this study. The modification was carried out with chitosan (CHI) and silica particles (SiO2 ), by using both a ... -
Hydrophobicity of galena with ovalbumin and dithiophosphinate in relation to its potential response
(Polish Mineral Engineering Society, 2018)This study was performed to elucidate the role of ovalbumin (OVA) on the hydrophobicity and potential response of galena in the presence of dithiophosphinate (DTPI). OVA was tested as environmentally friendly depressing ... -
Influence of interstitial filling on breakage kinetics of gypsum in ball mill
(Elsevier, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
Interrelationships between the bond grindability with physicomechanical and chemical properties of coals
(Taylor and Francis, 2013)In this research, different techniques for the estimation of Bond grindability (Gbg) values of coals are studied. Data from ten sub-bituminous coals from Turkey are used by featuring physicomechanical (ISI, Is, and FD) and ... -
Investigation of breakage behavior of different mineralogical and morphological characteristic pumices
(2011)The objective of this study is to analyze dry grinding behavior of four different pumices in terms of Bond grindability value, selection and breakage parameters values. For this purpose, firstly, Bond grindability test ... -
Investigation of the breakage parameters of gypsum as dependent on interstitial filling in a laboratory ball mill
(Springer Nature, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
An investigation on the effects of the ball filling on the breakage parameters of natural amorphous silica
(Elsevier B.V., 2016)The effects of ball filling on the selection (Si) and breakage functions (Bi,j) for the natural amorphous silica were investigated in this paper. At four levels (20%, 30%, 40% and 50%) of ball filling, the selection functions ... -
Li-doped fullerene pillared graphene nanocomposites for enhancing hydrogen storage: A computational study
(Elsevier, 2021)Hydrogen physisorption in lithium doped fullerene pillared graphene nanocomposites (Li-FPGNs) having tunable pore structures were examined under different temperature and pressure conditions via grand canonical Monte Carlo ... -
Modeling of grinding process by artificial neural network for calcite mineral
(IEEE, 2011)The grindability properties of calcite sample belong to Afyonkarahisar region were investigated at batch grinding conditions based on a kinetic model. The obtained kinetic model parameters were used to estimate the product ... -
Monte Carlo simulations of hydrogen adsorption in fullerene pillared graphene nanocomposites
(Taylor & Francis Ltd, 2020)The objective of this study is to investigate the hydrogen storage performances of three-dimensional periodic fullerene pillared graphene nanocomposites (FPGNs) consisting of covalently bonded fullerene units between ... -
N-vinylcaprolactam-based microgels: synthesis, characterization and drug release applications
(Springer Netherlands, 2016)In this study, N-vinylcaprolactam, metacrylic acid sodium salt and itaconic acid sodium salt-based copolymeric and terpolymeric microgels were synthesized by precipitation polymerization method with 2,2?-azobis(2-methylp ... -
A new binder in production of water-resistant briquettes from bituminous coals: Co-polymer binder
(Taylor and Francis Inc., 2016)Briquetting could be a solution to economic and environmental problems regarding fine coals. However, briquettes that are formed using molasses disintegrate in water and create problems. Providing water resistance to ... -
A new model for comminution behavior of different coals in an impact crusher
(Taylor and Francis Inc., 2014)In this study, breakage behavior of three different coals in a laboratory impact crusher was investigated. The laboratory impact crusher carrying three rows of hammers is rotating at 2,840 rpm driven by a 1.1 kW motor. In ... -
A new size distribution model by t-family curves for comminution of limestones in an impact crusher
(Elsevier, 2011)In the evaluation of crushers, t-family curves obtained from single particle test methods are frequently used. It is known that there are many difficulties and problems in these tests. In this study the breakage behaviour ... -
A novel fluorinated monomer: Synthesis, characterization and ATRP of 5,6,7,8-tetrafluoronaphthalen-1-yl acrylate
(Elsevier Science Sa, 2021)A new fluorinated naphthyl-acrylate based monomer was synthesized in three steps, namely the addition reaction of furan via Diels Alder cycloaddition reaction, acid catalyzed aromatization reaction and Schotten-Baumann ... -
A novel multilayer hydrogel wound dressing for antibiotic release
(Elsevier, 2020)In this study, the novel multilayer (ML) hydrogels were developed as antibacterial wound dressings. ML hydrogels were prepared as four layers using carboxylated polyvinyl alcohol (PVA-C), gelatin (G), hyaluronic acid (HA) ... -
A novel wound dressing material: Pullulan grafted copolymer hydrogel via UV copolymerization and crosslinking
(Editions de Sante, 2020)This study presents the preparation and characterization of pullulan grafted copolymer hydrogel as a new wound dressing material. In this regard, pullulan grafted copolymer hydrogel (PGH) was prepared via UV copolymerization ... -
Photocrosslinked methacrylated pectin and methacrylated hyaluronic acıd wound dressing loaded with oleuropein as bioactive agent
(TAYLOR & FRANCIS AS, 2023)Oleuropein-loaded photocrosslinked hydrogels, consisting of methacrylated pectin (PEC-MA) andmethacrylated hyaluronic acid (HA-MA), were developed as a new hydrogel wound dressing.Pectin and hyaluronic acid were methacrylated ... -
Poly(vinyl alcohol)/(hyaluronic acid-g-kappa-carrageenan) hydrogel as antibiotic-releasing wound dressing
(Springer Int Publ Ag, 2021)The aim of this research was to investigate the potential of ampicillin-loaded hydrogels based on polyvinyl alcohol (PVA), hyaluronic acid (HA) and kappa-carrageenan ((K)-Carr) as an antibiotic-releasing wound dressing. ...
