Bölüm "Hitit Üniversitesi, Mühendislik Fakültesi, Polimer Mühendisliği Bölümü" Makale Koleksiyonu için listeleme
Toplam kayıt 58, listelenen: 21-40
-
Estimation of the Bond grindability index from chemical analysis values and modulus of mixture of raw material of marls
(ICE Publishing Ltd., 2012)In this study, the relationships between Bond grindability index (G bg) and chemical constituents were investigated on marl samples from the AS cement factory (Burdur/Turkey). First, standard Bond grindability tests were ... -
Estimation of the bond grindability index from the sink-float test data of two different particulate pumices
(Taylor and Francis, 2012)In this study, equations for estimating the Bond grindability index by the sink-float test data of pumice were developed. Primarily, the cumulative weight and porosity content of the floating fraction were determined for ... -
Evaluation by multi gravity separator (MGS) of a low grade chromite tailing from Yesilova-Burdur (Turkey)
(Polish Mineral Engineering Society, 2019)In this study, concentrability by a Multi-Gravity-Separator (MGS) of the chromite tailings with content 23.84% Cr2O3 from Yeşilova-Burdur (Turkey) is investigated. Mineralogical analyses showed that the chromite tailings ... -
An evaluation of a modified product size distribution model based on t-family curves for three different crushers
(Oficyna Wydawnicza Politechniki Wroclawskiej, 2013)Crushing is a process which is widely used in mineral processing plants, cement factories, aggregates plants and some other industrial plants. Specific fracture energy of the particles is not the only fundamental property ... -
Evaluation of Grindability Behaviors of Four Different Solid Fuels Blending by Using the Hardgrove Mill
(Polish Mineral Eng Soc, 2019)Grindability measurements are widely used in mineral and coal processing industry to determine resistance of materials to comminution. Grindability measurement as testing methods can be divided into two general categories; ... -
The evaluation of grinding process using artificial neural network
(Elsevier, 2016)Ball milling has been the subject of intensive research for the past few decades. It is indeed the most encountered mineral processing operation of size reduction. Known as the most energy inefficient process, focus has ... -
The Evaluation Potential as Micronized Calcite of White Marble Waste
(Polish Mineral Eng Soc, 2020)Natural calcium carbonates have a great importance in the world's economy due to their numerous applications areas such as calcium carbonate in the paper and paint industries. The final calcite products have rigorous quality ... -
Flocculation of fine particles in ceramic wastewater by using polymers
(Polish Mineral Engineering Society, 2014)The clarification of industrial wastewaters by solid-liquid separation techniques and the removal of suspended particles are the problems of growing environmental consciousness. However, there appears to be very limited ... -
Hydrophobicity of galena with ovalbumin and dithiophosphinate in relation to its potential response
(Polish Mineral Engineering Society, 2018)This study was performed to elucidate the role of ovalbumin (OVA) on the hydrophobicity and potential response of galena in the presence of dithiophosphinate (DTPI). OVA was tested as environmentally friendly depressing ... -
Influence of interstitial filling on breakage kinetics of gypsum in ball mill
(Elsevier, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
Interrelationships between the bond grindability with physicomechanical and chemical properties of coals
(Taylor and Francis, 2013)In this research, different techniques for the estimation of Bond grindability (Gbg) values of coals are studied. Data from ten sub-bituminous coals from Turkey are used by featuring physicomechanical (ISI, Is, and FD) and ... -
Investigation of breakage behavior of different mineralogical and morphological characteristic pumices
(2011)The objective of this study is to analyze dry grinding behavior of four different pumices in terms of Bond grindability value, selection and breakage parameters values. For this purpose, firstly, Bond grindability test ... -
Investigation of the breakage parameters of gypsum as dependent on interstitial filling in a laboratory ball mill
(Springer Nature, 2011)Gypsum is an industrial material used in many applications such as building and chemical industry, fertilizer manufacture, medicine and dentistry. In these industries, there is need for finely ground gypsum. Energy consumption ... -
An investigation on the effects of the ball filling on the breakage parameters of natural amorphous silica
(Elsevier B.V., 2016)The effects of ball filling on the selection (Si) and breakage functions (Bi,j) for the natural amorphous silica were investigated in this paper. At four levels (20%, 30%, 40% and 50%) of ball filling, the selection functions ... -
N-vinylcaprolactam-based microgels: synthesis, characterization and drug release applications
(Springer Netherlands, 2016)In this study, N-vinylcaprolactam, metacrylic acid sodium salt and itaconic acid sodium salt-based copolymeric and terpolymeric microgels were synthesized by precipitation polymerization method with 2,2?-azobis(2-methylp ... -
A new binder in production of water-resistant briquettes from bituminous coals: Co-polymer binder
(Taylor and Francis Inc., 2016)Briquetting could be a solution to economic and environmental problems regarding fine coals. However, briquettes that are formed using molasses disintegrate in water and create problems. Providing water resistance to ... -
A new model for comminution behavior of different coals in an impact crusher
(Taylor and Francis Inc., 2014)In this study, breakage behavior of three different coals in a laboratory impact crusher was investigated. The laboratory impact crusher carrying three rows of hammers is rotating at 2,840 rpm driven by a 1.1 kW motor. In ... -
A new size distribution model by t-family curves for comminution of limestones in an impact crusher
(Elsevier, 2011)In the evaluation of crushers, t-family curves obtained from single particle test methods are frequently used. It is known that there are many difficulties and problems in these tests. In this study the breakage behaviour ... -
Prediction of barite recovery and grade by multiple linear regression (MLR) analysis in concentrating of barite tailings by using multi-gravity separator (MGS)
(Taylor & Francis Inc, 2021)Multi-gravity separator (MGS) is a very effective separator for very fine-sized minerals. In this study, for the first time in the literature, the concentrability of a typical barite plant fines (tailing) was investigated ... -
Prediction of the bond grindability index from the sink-float test data of coals
(Taylor and Francis, 2013)In this study, a relation for calculating the Bond grindability by the sink-float test data of coals was studied. Primarily, sink-float tests for three coal samples were made. Secondly, the cumulative weight and ash content ...