Yayın tarihi için Makale Koleksiyonu listeleme
Toplam kayıt 78, listelenen: 21-40
-
Interrelationships between the bond grindability with physicomechanical and chemical properties of coals
(Taylor and Francis, 2013)In this research, different techniques for the estimation of Bond grindability (Gbg) values of coals are studied. Data from ten sub-bituminous coals from Turkey are used by featuring physicomechanical (ISI, Is, and FD) and ... -
Application of statistical process control for coal particle size
(Taylor and Francis, 2013)In this article, variations in particle sizes (F50 and P 50) obtained from feeding and ground coals in a vertical roller mill of AS Cement Factory (Turkey) were investigated using control charts and process capability ... -
An evaluation of a modified product size distribution model based on t-family curves for three different crushers
(Oficyna Wydawnicza Politechniki Wroclawskiej, 2013)Crushing is a process which is widely used in mineral processing plants, cement factories, aggregates plants and some other industrial plants. Specific fracture energy of the particles is not the only fundamental property ... -
Effects of mill speed on kinetic breakage parameters of four different particulate pumices
(Taylor and Francis, 2013)In this study, the effect of mill speed was investigated on different particulate pumice samples at batch grinding conditions based on a kinetic model. For this purpose, S i and B i,j equations were determined from the ... -
Study on adsorption, regeneration, and reuse of crosslinked chitosan graft copolymers for Cu(II) ion removal from aqueous solutions
(Desalination Publications, 2014)This study deals with the adsorption, regeneration, and reuse of chitosan-graft-itaconic acid and chitosan-graft-crotonic acid beads for Cu(II) ion removal from aqueous solutions. For this aim, adsorption capacities, ... -
Electrical conductivity and spectroscopic characterization of Blends of poly(2-chloroaniline)/polyaniline P(2ClANI)/PANI copolymer with PVC exposed to gamma-rays
(2014)Poly(2-chloroaniline)/polyaniline P(2ClANI)/PANI) random copolymer was synthesized in the form of nanoparticles by chemical routes. Incorporation of P(2ClANI) into PANI backbone significantly increased the solubility of ... -
Synthesis and characterization of terminalalkynyl-substituted unsymmetrical zinc phthalocyanine conjugated with well-defined polymers
(2014)Synthesis of unsymmetrically terminalalkynyl substituted zinc (II) phthalocyanine (ZnPc) through an efficient statistical condensation reaction with the unprotected phthalonitrile (2) is reported for the first time. Isolated ... -
A new model for comminution behavior of different coals in an impact crusher
(Taylor and Francis Inc., 2014)In this study, breakage behavior of three different coals in a laboratory impact crusher was investigated. The laboratory impact crusher carrying three rows of hammers is rotating at 2,840 rpm driven by a 1.1 kW motor. In ... -
A study on the effects of coal feed size and coal type on the performance of a laboratory jaw crusher
(Taylor and Francis, 2014)In this study, the effects at the three different coal size fractions on the five different characteristic coal samples depend on the performance of a crusher in the laboratory. Thus, a jaw crusher was investigated. Based ... -
Flocculation of fine particles in ceramic wastewater by using polymers
(Polish Mineral Engineering Society, 2014)The clarification of industrial wastewaters by solid-liquid separation techniques and the removal of suspended particles are the problems of growing environmental consciousness. However, there appears to be very limited ... -
The effects of ball types on breakage parameters of barite
(Polish Mineral Engineering Society, 2014)Spherical balls are the dominant media shape used in the tumbling mills. However spherical balls wear into nonspherical fragments as a result of breakage due to impact and different wearing mechanisms inside the mill. Thus ... -
Sodyum Akrilat Esaslı Hidrojel Ve Kriyojellerin Şişme, Adsorpsiyon Ve Mekanik Özelliklerinin İncelenmesi
(2014)Bu çalışmada, sodyum akrilat esaslı hidrojel ve kriyojellerin şişme davranışları (şişme kapasitesi, denge şişme değeri ve şişme kinetiği), boyar madde (metilen mavisi) adsorpsiyonu ve mekanik özellikleri karşılaştırmalı ... -
The Effects of Moisture Content and Coal Mixtures on the Grinding Behavior of Two Different Coals
(Taylor & Francis Inc, 2014)In this article, effects of moisture content and coal mixtures on grinding properties of the samples of two different fine coals, which were used in the Golta Cement Factory in Isparta (Turkey) were investigated. Grinding ... -
The effect of ball type in fine particles grinding on kinetic breakage parameters
(Polish Mineral Engineering Society, 2015)In the study, the effect of different grinding media on breakage parameters was investigated. Ceramic and steel balls were used as the grinding media. It was observed that the grinding of ignimbrite obeyed first-order ... -
The relationship between cement quality and separation cut size
(Polish Mineral Engineering Society, 2015)Cement is prepared by firing a mixture of raw materials, one of which is mainly composed of calcium carbonate and the other of aluminium silicate. The most familiar materials answering to this description are limestone and ... -
Dewatering of barite clay wastewater by inorganic coagulants and co-polymer flocculants
(Oficyna Wydawnicza Politechniki Wroclawskiej, 2015)This work is focused on dewatering of barite-containing clay waste from a barite beneficiation plant by coagulation and flocculation to enhance the dewatering rate and recycling of process water. A flocculation performance ... -
Preparation of a new polymer-dispersed liquid crystal film by using phthalocyanine-functional photocurable copolymer
(John Wiley and Sons Inc., 2015)A new, asymmetrical zinc phthalocyanine (aZnPc)-functional photocurable copolymer was prepared by the combination of atom transfer radical polymerization and copper (I)-catalyzed azide-alkyne cyclo-addition (CuAAC) click ... -
N-vinylcaprolactam-based microgels: synthesis, characterization and drug release applications
(Springer Netherlands, 2016)In this study, N-vinylcaprolactam, metacrylic acid sodium salt and itaconic acid sodium salt-based copolymeric and terpolymeric microgels were synthesized by precipitation polymerization method with 2,2?-azobis(2-methylp ... -
Synthesis and characterization of poly (VCL-HEA-IA) terpolymer for drug release applications
(M.D. Publications, 2016)In the present work, poly(VCL-HEA-IA) terpolymeric hydrogels were synthesized by free radical polymerization of N-vinylcaprolactam (VCL), 2-hydroxethyl acrylate (HEA), and itaconic acid (IA) monomers using N, N'-methylene ... -
A new binder in production of water-resistant briquettes from bituminous coals: Co-polymer binder
(Taylor and Francis Inc., 2016)Briquetting could be a solution to economic and environmental problems regarding fine coals. However, briquettes that are formed using molasses disintegrate in water and create problems. Providing water resistance to ...