Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorAsan, Gülden
dc.contributor.authorAsan, Abdurrahman
dc.contributor.authorÇelikkan, Hüseyin
dc.date.accessioned2020-01-30T13:27:53Z
dc.date.available2020-01-30T13:27:53Z
dc.date.issued2020en_US
dc.identifier.citationAsan, G., Asan, A., Çelikkan, H. (2020). The effect of 2D-MoS2 doped polypyrrole coatings on brass corrosion. Journal of Molecular Structure, 1203: 1-5.en_US
dc.identifier.issn0022-2860
dc.identifier.issn1872-8014
dc.identifier.urihttps://doi.org/10.1016/j.molstruc.2019.127318
dc.identifier.urihttps://hdl.handle.net/11491/5671
dc.description.abstractConductive polymers have an important potential against the corrosion applications because they arehighly resistant to chemicals besides they have homogeneous coating properties and transport metals tomore noble regions. However, the major disadvantage of conductive polymers such as polypyrrole (PPy)is their low mechanical strength. In this study, the doping effect of MoS2into the PPy coatings by theelectropolymerization of polypyrrole (PPy) and exfoliated MoS2on the corrosion of brass was investi-gated. The corrosion protection of these coatings were determined by measuring the corrosion rates withTafel polarization method in 0.1 M H2SO4media. PPy and MoS2doped PPy (MoS2@PPy) coatings weresuccessfully obtained by the use of chronoamperometry technique in 0.2 M H2C2O4solutions with 0.2 Mpyrrole and various concentrations of MoS2. It was observed that MoS2@PPy coatings were homoge-neously coated without and with all MoS2concentrations on the metal surface and well adhered to thebrass surface, but MoS2@PPy coating with 25 ppm MoS2showed the best corrosion protection. Thesurface and chemical characterizations of the coatings were performed by SEM-EDSen_US
dc.language.isoengen_US
dc.publisherElsevier B.V.en_US
dc.relation.isversionof10.1016/j.molstruc.2019.127318en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject2D-MoS2en_US
dc.subjectCorrosionen_US
dc.subjectBrassen_US
dc.subjectPolypyrroleen_US
dc.titleThe effect of 2D-MoS2 doped polypyrrole coatings on brass corrosionen_US
dc.typearticleen_US
dc.relation.journalJournal of Molecular Structureen_US
dc.departmentHitit Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Mülkiyet Koruma ve Güvenlik Bölümüen_US
dc.authorid0000-0002-1010-3981en_US
dc.identifier.volume1203en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster