Ara
Toplam kayıt 245, listelenen: 101-110
Physical properties of LLDPE and PP filled with wood flours
(American Society of Mechanical Engineers (ASME), 2015)
In this study, composites of polypropylene (PP), as well as linear low density polyethylene (LLDPE) thermoplastics filled with wood flour have been investigated to study the effect of size and amount of wood flour on their ...
Energy and exergy analysis of an air conditioning system using the mixture of outdoor and return air
(2012)
Energy and exergy analysis of the air conditioning systems employing the mixture of outdoor and return air (ACOR) are presented. The equations of heat transfer rate and exergy destruction are developed for ACOR according ...
Stress analysis of a rotating FGM circular disc with exponentially-varying properties
(2012)
In this study, elastic stress analysis of a thin circular disc made of functionally graded materials (FGMs) subjected to a temperature load and an inertia force due to rotation of the disc is investigated. Based on the two ...
Design and analysis of quad-band grid array microstrip antenna at UWB and ISM channel frequencies for WBAN operations
(Institute of Electrical and Electronics Engineers Inc., 2018)
In this paper, we present design and simulation of a compact grid array microstrip patch antenna. In the design of antenna a RT/duroid 5880 substrate having relative permittivity, thickness and loss tangent of 2.2, 1.57 ...
Investigation of experimental research on the low velocity impact damage behavior of NCF composite plates - Complas XII
(2013)
In this study an experimental investigation is performed on the impact response of non-crimp fabric composite plates at room temperature. Chopped strand mat combi is used as reinforcing material and two kinds of matrix; ...
Performance investigation of an eight cylinder gasoline engine
(American Society of Mechanical Engineers (ASME), 2014)
Performance investigation of a Chevrolet 5.7, eight cylinder gasoline engine is experimentally carried out at laboratuary conditions by means of the special softwares called "NetDyn" and "WinDyn". This experimental work ...
Monitoring and control of PLC based motion control systems via device-net
(Institute of Electrical and Electronics Engineers Inc., 2014)
The control of mechanical systems are generally applied by using electric motors which are useful for the control of velocity, position and torque. On the other hand, servo motors are preferred due to their characteristic ...
A new method to separate broken rotor failures and low frequency load oscillations in three-phase induction motor
(IEEE Computer Society, 2013)
For a time-varying loads, the presence of load fluctuation may sometimes have the same effect as broken rotor failure in a stator current of induction motors. In recent years, many methods, which are used to distinguish ...
Diagnosis of broken rotor fault in inverter-fed im by using analytical signal angular fluctuation
(Institute of Electrical and Electronics Engineers Inc., 2014)
The aim of this paper is to detect broken rotor bar fault at the presence of low frequency load torque oscillation in inverter-fed induction motors. The low frequency load torque oscillation in induction motor may sometimes ...
The analysis of tissue temperature rise caused by linear array transducers with Program Spheresum
(Institute of Electrical and Electronics Engineers Inc., 2016)
Diagnostic ultrasounds transmit sound waves into the body, and thus reveal important information about it. Because the transmitted sound waves cause tissue heating, diagnostic ultrasounds can produce adverse biologic effects ...