Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorDeniz, Vedat
dc.date.accessioned2021-11-01T14:58:09Z
dc.date.available2021-11-01T14:58:09Z
dc.date.issued2014
dc.identifier.citationDeniz, V. (2014). The effects of moisture content and coal mixtures on the grinding behavior of two different coals. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 36(3), 292-300.en_US
dc.identifier.issn1556-7036
dc.identifier.issn1556-7230
dc.identifier.urihttps://doi.org/10.1080/15567036.2010.538811
dc.identifier.urihttps://hdl.handle.net/11491/6486
dc.description.abstractIn this article, effects of moisture content and coal mixtures on grinding properties of the samples of two different fine coals, which were used in the Golta Cement Factory in Isparta (Turkey) were investigated. Grinding tests were done in a new grinder called Mortar Grinder. A good calibration has been established between the Mortar Grinder with the Bond and the Hardgrove grindabilities at the beginning of the tests. At the first stage, A and B type two coal samples, and in the second stage, the samples of three different mixtures (25% of A + 75% of B, 50% of A + 50% of B, and 75% of A + 25% of B) have been worked in grindability tests for different moisture contents. As a result, although the A and B coal samples were showing different grinding intervals versus moisture contents, these samples had similar grinding characteristic curves. Additionally, the high quality coals have easier grinding in respect to the low quality coals with the same moisture content.en_US
dc.language.isoengen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofEnergy Sources Part A-Recovery Utilization And Environmental Effectsen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBond Work Indexen_US
dc.subjectCoalen_US
dc.subjectCoal Mixtureen_US
dc.subjectHargrove Grindabilityen_US
dc.subjectMoistureen_US
dc.titleThe Effects of Moisture Content and Coal Mixtures on the Grinding Behavior of Two Different Coalsen_US
dc.typearticleen_US
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Polimer Mühendisliği Bölümüen_US
dc.authoridDeniz, Vedat / 0000-0003-4098-959X
dc.identifier.volume36en_US
dc.identifier.issue3en_US
dc.identifier.startpage292en_US
dc.identifier.endpage300en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.department-temp[Deniz, V.] Hitit Univ, Dept Polymer Engn, TR-19030 Cevre Yolu, Corum, Turkeyen_US
dc.contributor.institutionauthorDeniz, Vedat
dc.identifier.doi10.1080/15567036.2010.538811
dc.authorwosidDeniz, Vedat / N-6145-2015
dc.description.wospublicationidWOS:000328930200008en_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster