Erişim şekli için "info:eu-repo/semantics/closedAccess" Makine Mühendisliği Bölümü listeleme
Toplam kayıt 105, listelenen: 1-20
-
Acoustic analysis of a liquefied petroleum gas-fired pulse combustor
(2008)Experimental investigation of acoustic characteristics of a Helmholtz type liquefied petroleum gas-fired pulse combustor is presented. In the experiments, the length of the tail pipe was changed from 1.9 m to 1.3 m by 10 ... -
Adsorptive separation of CH4, H2, CO2, and N2 using fullerene pillared graphene nanocomposites: Insights from molecular simulations
(SPRINGER, 2023)Context The adsorptive separation performances of fullerene pillared graphene nanocomposites (FPGNs) with tunable micro and meso porous morphology are investigated for the binary mixtures of CH4, H2, CO2 and N2 by using ... -
Ambient relative humidity effects on mechanical properties of FDM 3D printed PLA components
(IOP Publishing Ltd, 2023)Abstract In this study, poly(lactic acid) samples were printed by using the fused deposition method whereas ambient relative humidity conditions and filling percentages varied. The effects of the relative humidity on the ... -
Assessment of an IGCC based trigeneration system for power, hydrogen and synthesis fuel production
(Elsevier Ltd, 2016)In this study, an integrated gasification combined cycle based trigeneration system is proposed to produce power, hydrogen and various Fischer-Tropsch (FT) synthesis products. The proposed plant consists of an (a) air ... -
A comparative study on crashworthiness of thin-walled tubes with functionally graded thickness under oblique impact loadings
(Taylor and Francis Ltd., 2019)The main objective of this study is to investigate the effects of functionally graded thickness (FGT) patterns and cross-sectional shapes (i.e. circular, square and hexagonal) on crashworthiness performance of thin-walled ... -
A comparative study on the effects of different thermochemical coating techniques on corrosion resistance of STKM-13A steel
(Springer Boston, 2018)The corrosion resistances of three different thermochemical coatings (grown using titanizing, boriding, and borotitanizing treatments) applied to STKM-13A steel surfaces were investigated. The coatings were characterized ... -
Computed tomography analysis of impact response of lightweight sandwich panels with micro lattice core
(SAGE Publications Ltd, 2018)One of the main focuses in transportation engineering is the application of sandwich materials in order to create safer and efficient vehicles. The main focus of this study was the application of 3D computed tomography for ... -
Crashworthiness of graded lattice structure filled thin-walled tubes under multiple impact loadings
(Elsevier Sci Ltd, 2020)The objective of this study is to investigate the crashworthiness performances of graded lattice structure filled tubes (GLSFTs) under multiple impact loadings. Different graded body-centered cubic aluminum lattice structures ... -
Crashworthiness optimization of circular tubes with functionally-graded thickness
(Emerald Group Publishing Ltd., 2016)Purpose: The purpose of this paper is to develop a new multi-objective optimization procedure for crashworthiness optimization of thin-walled structures especially circular tubes with functionally graded thickness. ... -
Deep drawing of polymer coated metal sheets
(Korean Society of Mechanical Engineers, 2019)In the present study, the deep drawing of polymer coated metallic sheets were experimentally investigated to reduce friction and increase manufacturing efficiency without using a lubricant. Coating of metal sheets with a ... -
Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
(Taylor and Francis Ltd., 2016)In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi ... -
Design of hybrid composites from scrap aluminum reinforced with (SiC+TiO2+Gr+Ti+B)
(Springer New York LLC, 2017)Hybrid Metal Matrix Composites (HMMCs) have very light weight, high strength, and show better resistance to corrosion, oxidation, and wear. Impact resistance is an especially important property of these HMMCs which is ... -
Design of sma based actuators used in robotics
(2013)This work introduces to Shape Memory Alloy (SMA) using in Robotics as actuators. We investigated a quadruped platform actuated by SMAs which act with variable elasticity. SMAs ought to prove necessary forces for all gaits. ... -
Determination of noise level of a gas-fired pulse combustor
(2007)Experimental determination of noise level of a Helmholtz type gas-fired pulse combustor is presented. During the tests, the tail pipe length was varied from 1.9 m to 1.3 m by 10 cm intervals. Noise level measurements were ... -
Development of a design for a crash energy management system for use in a railway passenger car
(SAGE Publications Ltd, 2016)A design approach for a crash energy management (CEM) system for a N13-type railway passenger car used by the Turkish State Railway Company is developed in this paper. The components of the CEM system are honeycomb-structured ... -
Effect of attachment types and number of implants supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis
(Elsevier Ltd, 2015)The objective of this study was to calculate stresses in bone tissue surrounding uncoupled and splinted implants that are induced by a bite force applied to the mandible and to determine whether the number of mandibular ... -
Effect of coating material on wear in internal gears
(Materials and Energy Research Center, 2017)Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards' wear formulation ... -
Effect of different palatal vault shapes on the dimensional stability of glass fiberreinforced heat-polymerized acrylic resin denture base material
(2012)Objective: The aim of this study was to determine the effect of different palatal vault shapes on the dimensional stability of a glass fiber reinforced heat polymerized acrylic resin denture base material. Methods: Three ... -
The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives
(Elsevier Ltd, 2015)It was aimed to investigate the effect of five different fillers on the adhesion strength of the metal parts used in different industries by using T-peel and lap-shear tests with respect to ASTM D 1876 and ASTM D 1002 ... -
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ...