Ara
Toplam kayıt 105, listelenen: 71-80
Energy and irreversibility analysis of a cascade refrigeration system for various refrigerant couples
(2010)
This study deals with energy and irreversibility analysis of a cascade refrigeration system employing various refrigerant couples, namely R152a–R23, R290–R23, R507–R23, R234a–R23, R717–R23 and R404a–R23, using a computer ...
Production of metal matrix composites by the vortex method and investigation of the effect of changing casting temperature on particles ratio of product-composite
(Blackwell Publishing Inc., 2014)
In this study, Al-2011 alloyed and Al2O3 particle-reinforced metal matrix composite (MMCs) were produced by using the Vortex method. Immediately after pouring composite to the mold and before full solidification, the ...
Effect of swirl generator inserted into a tube on exergy transfer: Decaying flow
(Taylor and Francis Inc., 2014)
This study experimentally investigates the effect of conical injector type swirl generator inserts on heat and exergy transfer in a uniform heat flux tube for turbulence regime. One hundred twenty watts of heat are applied ...
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)
Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ...
Experimental investigation of heat transfer from different pin fin in a rectangular channel
(Taylor and Francis Ltd., 2018)
In this study, the effect of both hexagonal pin fins (HPFs) and cylindrical pin fins (CPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally investigated. ...
Experimental and numerical analysis of low velocity impact on a preloaded composite plate
(Elsevier Ltd, 2015)
An experimental and numerical study on the influence of biaxial preloading on the low velocity impact performance of E-glass/epoxy-laminated composite plates was conducted. For this aim, an experimental device was developed ...
Crashworthiness optimization of circular tubes with functionally-graded thickness
(Emerald Group Publishing Ltd., 2016)
Purpose: The purpose of this paper is to develop a new multi-objective optimization procedure for crashworthiness optimization of thin-walled structures especially circular tubes with functionally graded thickness. ...
Static behavior of lattice structures produced via direct metal laser sintering technology
(Elsevier Ltd, 2017)
The aim of this scientific work was the analysis of the micro lattice structures under uniaxial quasi-static compression loading with regard to the effect of unit cell size and strut diameter. A wide range of cubic lattice ...
The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives
(Elsevier Ltd, 2015)
It was aimed to investigate the effect of five different fillers on the adhesion strength of the metal parts used in different industries by using T-peel and lap-shear tests with respect to ASTM D 1876 and ASTM D 1002 ...
An elastic-plastic and residual stress analysis steel reinforced thermoplastic composite cantilever beam
(2010)
In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ...