Ara
Toplam kayıt 97, listelenen: 21-30
A monitoring and control system integrated with smart phones for the efficient use of underground water resources in agricultural product growing
(Hitit University, 2017)
Monitoring and control system is very important for crop development process in agriculture zones. A structure which is carried out based on the type of the product with the knowledge of temperature and humidity values of ...
Experimental investigation of cooling performance a heat pump for near azeotropic refrigerant R404A
(Hitit University, 2017)
In this study, in order to investigate the effect of outdoor air temperatures on the performance of an air source heat pump, operated in cooling mode, using R404A refrigerant, the heat pump was tested at the outdoor air ...
Analysis of scoring resistance on coated spur gears by considering surface roughness
(Hitit University, 2017)
With the rise of velocity and momentum in machines as a result of technological developments, on gears, alongside refraction from the bottom of the gears and pitting formation, and scoring formation has showed up. In the ...
Exergy destruction analysis of a gas turbine power plant
(Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2018)
According to the data released by “Republic of Turkey-the Ministry of Energy and Nat ural Resources”, by the end of July 2017, 34% of the electricity of Turkey was produced from natural gas. As it is compared to ...
A novel two-layered glass-ceramic sealant design for solid oxide fuel cells
(John Wiley and Sons Ltd, 2017)
A thermo-mechanical stress develops on the sealant of an solid oxide fuel cell (SOFC) stack because of thermal expansion coefficient (TEC) differences among ceramic electrolyte, metallic interconnector, and glass-ceramic ...
A novel two-part interconnector for solid oxide fuel cells
(John Wiley and Sons Ltd, 2014)
A two-part interconnector is developed for solid oxide fuel cell stacks to reduce cost and to improve sealing. The novel interconnector involves a metallic core for current collection and gas distribution and a ceramic ...
Prediction model for the impact response of glass fibre reinforced aluminium foam sandwiches
(Elsevier Ltd, 2015)
The use of sandwich structures combines low weight with high energy absorbing capacity, so they are suitable for applications in the transport industry (automotive, aerospace, shipbuilding industry), where the "lightweight ...
Nonlinear vibrations of spring-supported axially moving string
(Kluwer Academic Publishers, 2015)
In this study, multi-supported axially moving string is discussed. Supports located at the ends of the string are simple supports. A support located in the middle section owns the features of a spring. String speed is ...
Effect of tooth profile modification on wear in internal gears
(IOP Publishing Ltd, 2018)
Internal gears are often used in the automotive industry when two gears are required to rotate in the same direction. Tooth shapes, slippage speeds at the beginning and end of meshing are different according to the external ...
Numerical investigation of amounts of heat, power and temperature distribution in IT-SOFC
(Electrochemical Society Inc., 2013)
In this study, thermodynamic and heat transfer concepts were combined to understanding correlation of heat, power and temperature gradient on the cell. All of heat sources and amounts has been determined for electrolyte ...