Ara
Toplam kayıt 23, listelenen: 11-20
Quasi-static axial crushing behavior of thin-walled circular aluminum tubes with functionally graded thickness
(Elsevier Ltd, 2016)
In this paper, the crushing behavior of circular aluminum thin-walled tubes with functionally graded thickness (FGT) are investigated experimentally. To this aim, three different thickness grading patterns are introduced ...
Effects of holding force on the springback behavior of annealed aluminum plates
(Elsevier Ltd, 2016)
Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing ...
Stress analysis of functionally graded disc under thermal and mechanical loads
(Elsevier Ltd, 2011)
In this study, the elastic stress analysis of annular discs made of functionally graded materials (FGMs) subjected to both uniform pressures on the inner surface and a linearly decreasing temperature distribution has been ...
Numerical investigation of heat transfer using impinging jets on triangular and square ribbed roughened walls
(Turkish Society for Thermal Science and Technology, 2017)
This paper presents a heat removal study on triangular and square ribbed surfaces under an array of impinging air jets. The investigation was carried out using nozzles with a 7x3 rectangular array of circular jets. The ...
Second law analysis of different refrigerants in a two stage vapor compression cycle
(Turkish Society for Thermal Science and Technology, 2015)
In this study, the second law analysis has been made by means of the program developed using the software program EES (EES-V9.172-3D) in a two stage vapor-compression refrigeration cycle for the refrigerants such as R600 ...
Comparison of superheating effect of water as a refrigerant with the other refrigerants
(2011)
The performance comparison of water as a refrigerant (R718) with some refrigerants including R717, R290, R134a, and R152a is presented for a vapor compression refrigeration cycle. A computer program simulating the vapor ...
Saturation operation on the direct current motor that is used for manipulator control
(2013)
In this study, the saturation operation on the motor armature current has been carried out with a manipulator control algorithm. Manipulator system is controlled by state feedback plus integral error control strategy. ...
Design and implementation of real time monitoring and control system for distributed robotic systems supported with IOS/android application
(Strojarski Facultet, 2018)
In this study, a real time monitoring and control of the working parameters of distributed robotic systems used in manufacturing processes is presented. Additionally, a fault diagnosis and protection system is developed ...
Exergy analysis of coil-spring turbulators inserted in the horizontal concentric tubes
(2010)
In this study, to obtain definitive information about the effects of spring-type turbulators located in the inner pipe of a concentric heat exchanger, the rates of exergy transfer Nusselt number (Nue) and exergy loss (E*) ...
Wear and Service Life of 3-D Printed Polymeric Gears
(MDPI, 2022)
Plastic gears are mostly used in the textile, food, and automotive industries due to their silent operation, corrosion resistance, and light and cheap advantages. Plastic gears are generally manufactured by injection molding ...