Ara
Toplam kayıt 11, listelenen: 1-10
Investigation of the effect of temperature on the mechanical properties of E-Glass fiber reinforced composites
(The Composites and Advanced Materials Expo (CAMX), 2014)
In this study, mechanical characterization of E-Glass fiber reinforced composite materials that are manufactured via Vacuum Infusion (VI) (a.k.a Vacuum Assisted Resin Transfer Molding (VARTM)) is investigated. The mechanical ...
Impact response of sandwiches with open-cell casting metal foam and GFRP skins
(Taylor and Francis Ltd., 2016)
The main advantage of using sandwich structures is their high strength, high energy absorbing capacity and high bending stiffness to weight ratio. Therefore, they are unique for the applications where the light-weight ...
Low velocity impact response of glass fiber reinforced aluminium foam sandwich
(European Conference on Composite Materials, ECCM, 2012)
The aim of this study was the analysis of the bending and the low - velocity impact response of aluminium foam sandwich reinforced by the outer skins made of glass fiber reinforced epoxy matrix and the results were compared ...
Prediction model for the impact response of glass fibre reinforced aluminium foam sandwiches
(Elsevier Ltd, 2015)
The use of sandwich structures combines low weight with high energy absorbing capacity, so they are suitable for applications in the transport industry (automotive, aerospace, shipbuilding industry), where the "lightweight ...
Theoretical and experimental analysis for the impact response of glass fibre reinforced aluminium honeycomb sandwiches
(SAGE Publications Ltd, 2018)
Honeycomb sandwich structures are increasingly used in the automotive, aerospace and shipbuilding industries where fuel savings, increase in load carrying capacity, vehicle safety and decrease in gas emissions are very ...
Evaluation of the effects of surface treatments on different dental ceramic structures
(2013)
The surface treatments applied to porcelain materials can be different overglaze methods, chemical interactions and polishing techniques. The aims of these methods are the most durable restoration and the smoothest surface. ...
Effect of different palatal vault shapes on the dimensional stability of glass fiberreinforced heat-polymerized acrylic resin denture base material
(2012)
Objective: The aim of this study was to determine the effect of different palatal vault shapes on the dimensional stability of a glass fiber reinforced heat polymerized acrylic resin denture base material. Methods: Three ...
Static behavior of lattice structures produced via direct metal laser sintering technology
(Elsevier Ltd, 2017)
The aim of this scientific work was the analysis of the micro lattice structures under uniaxial quasi-static compression loading with regard to the effect of unit cell size and strut diameter. A wide range of cubic lattice ...
An elastic-plastic and residual stress analysis steel reinforced thermoplastic composite cantilever beam
(2010)
In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ...
Computed tomography analysis of impact response of lightweight sandwich panels with micro lattice core
(SAGE Publications Ltd, 2018)
One of the main focuses in transportation engineering is the application of sandwich materials in order to create safer and efficient vehicles. The main focus of this study was the application of 3D computed tomography for ...