Yayın tarihi için Makale Koleksiyonu listeleme
Toplam kayıt 36, listelenen: 21-36
-
Simulation of phase equilibria in high chromium white cast irons
(Uludağ University, 2018-12)In this study, using the Materials Calculator software program, the pseudo binary phase diagrams (i.e. isoplethal maps) of high chromium white cast irons (~19% in weight) with different molybdenum contents were simulated. ... -
Effects of nitridation time and precursor particle size on yield of β-SiAlON synthesized from calcined kaolinite
(Springer New York LLC, 2019)Carbothermal reduction and simultaneous nitriding (CTRN) of natural aluminosilicates is a method used to obtain phases of Si–Al–O–N system. SiAlON phases have important applications, such as high technology ceramics, for ... -
Production of Un-Doped and Er-Doped Y2O3 Thin Films by Electron Beam Evaporation Method
(Springer, 2019)In this study, un-doped and doped yttrium oxide (Y2O3) powders with different erbium concentrations were synthesized using sol-gel method. The synthesized powders were investigated by Raman analysis and the evolution of ... -
Effects of dopant rate and calcination parameters on photoluminescence emission of Y2O3:Eu3+ phosphors: A statistical approach
(Elsevier Sci Ltd, 2019)In this study, Y2O3:Eu3+ phosphorescent powders with different dopant rates were synthesized by sol-gel method. Statistical experimental design methods were used to investigate the effects of calcination temperature (800, ... -
Formation of alpha/beta-Si(3)N(4 )nanoparticles by carbothermal reduction and nitridation of geopolymers
(Wiley, 2019)Silicon nitride (Si3N4) particles with various alpha/beta-Si(3)N(4 )ratios were fabricated from geopolymer (GP)-carbon compositions (M2O center dot Al2O3 center dot 4.5SiO(2)center dot 12H(2)O+18C), where M is an alkali ... -
A New Approach for Cu and Fe/FexB Production from Chalcopyrite by Molten Salt Electrolysis
(Springer, 2020)In the present study, copper (Cu) and iron boride -( FexB) were produced for the first time through molten salt electrolysis using chalcopyrite -(CuFeS2) in an oxide- based borax electrolyte. Molten salt electrolysis was ... -
Modelling of relation between synthesis parameters and average crystallitesize of Yb2O3 nanoparticles using Box-Behnken design
(Elsevier, 2020)A straightforward wet chemical method has been applied for the fabrication of Yb2O3nanoparticles (NPs) fromytterbium nitrate solution by using ammonium carbonate as precipitation agent. Effects of precursor molarity(0.1, ... -
Effects of the alumina reinforcement ratio on the corrosion properties of iron based composite materials
(Carl Hanser Verlag, 2020)Iron based composite materials reinforced with various ceramic particles are used in operating conditions requiring features such as high hardness, strength and wear resistance. The composite materials may be subject to ... -
Fabrication and characterization of Yb-doped Y2O3 powders and thin films
(Carl Hanser Verlag, 2020)Yttrium oxide (Y2O3) and ytterbium (Yb)-doped Y2O3 particles were synthesized via the sol-gel method from the aqueous solution of their nitrate salts. The synthesized powders were then deposited on Corning glass substrates ... -
ZrO2 coating via e-beam evaporation on PE separators for lithium-ion batteries
(Springer Heidelberg, 2021)In this paper, ZrO2 is deposited on a polyethylene-based separator via electron beam evaporation method. The analyses reveal that the application of the ceramic-based coating enhances the electrolyte uptake capability from ... -
Production and characterization of re3+:Yb2o3 nanoparticles
(Trans Tech Publications Ltd, 2021)In this study, doped ytterbium oxide (Yb2O3) nanoparticles (NPs) with different dopant type (Eu and/or Tb) and undoped were synthesized by wet chemical method using nitrate salt as a starting source. Afterwards, they were ... -
Synthesis, characterization and radioluminescence properties of erbium-doped yttria phosphors
(Springer, 2021)Radioluminescence (RL) behaviour of erbium-doped yttria nanoparticles (Y2O3:Er3+ NPs) which were produced by sol-gel method was reported for future scintillator applications. NPs with dopant rates of 1at%, 5at%, 10at% and ... -
Effect of Particle Morphology on Physical, Mechanical and Wear Properties of Cobalt Metal Powders
(Springer India, 2021)Cobalt is used in applications that require high densities and good mechanical properties. Cobalt powder is used in batteries, cemented carbides, stainless steel, machine tools and also in manufacturing of metal matrix ... -
Photoluminescence Investigation of Tb Doped Yb2O3 Phosphors Produced by Precipitation Method
(2021)In this study, un-doped and Tb doped ytterbium oxide (Yb2O3:Tb3+) particles with different dopant rates (2, 4, 6 and 8 at. %) were produced by precipitation method, followed by subsequent calcination at 1000 °C for 2 h. ... -
Single step calciothermic synthesis of nickel boride particles in molten salt
(Springer, 2023)Abstract In this study, production of nickel boride (NixB) via calciothermic reduction in molten salt has been studied. Firstly, the electrochemical behaviors of CaO and NiO in CaCl2 melt were examined by cyclic voltammetry ... -
The removal of heavy metals from refinery effluents by sulfide precipitation
(BERG FAC TECHNICAL UNIV KOSICE, 2023)This study investigated the selective precipitation of copper (Cu2+), nickel (Ni2+) and zinc (Zn2+) ions from industrial wastewater by using sodium sulfide (Na2S). The effects of pH, time and free sulfide concentration on ...