Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "İnce, Hüseyin" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
Sayfa Başına Sonuç
Sıralama seçenekleri
  • Yükleniyor...
    Küçük Resim
    Öğe
    Geriden Kestirme Noktasında Ölçülen 100g’dan Büyük Açıların Collins Yönteminde İncelenmesi
    (2021) İnce, Hüseyin; Erdem, Nuri; Türen, Yener; Tombuş, Fazlı Engin; Ozulu, İbrahim Murat
    Günümüzde konum belirlemede geriden kestirme yöntemi, uydu teknolojisinin gelişmesiyle pek kullanılmasa da, uyduların sinyallerinin alınamadığı yerlerde, klasik geriden kestirme yöntemini kullanmak gerekebilir. Ölçme bilgisi literatüründe geriden kestirme noktasının koordinatının hesaplanmasıyla ilgili Collins, Kaestner ve Cassini yöntemlerinde, kestirme noktasında ölçülen açıların 100g’dan küçük durumları dikkate alınmıştır. Kestirme noktasında ölçülen açılar 100g’dan büyük olduğunda geriden kestirmede hesap yöntemlerinden Collins yöntemiyle kestirme noktasının koordinat hesabında, güçlükler ortaya çıkmaktadır. Yani kestirme noktasında, bakılan nirengi noktaları arsında ölçülen açılar 100g’dan büyük olduğunda, problemin Collins yönteminin klasik haliyle çözülemeyeceği anlaşılmıştır. Problemin çözümü için literatürde bir kaynakta bu konuya yer verildiği, ancak çözümün önereceğimiz yöntemden farklı olduğu görülmüştür. Bu çalışmada, literatürdeki kaynakta belirtilen çözüm yöntemi ile tarafımızca önerilen yöntem açıklanacaktır. Çalışmada, konuyla ilgili uygulamalar yapılmış ve elde edilen bulgular ve kanaatler belirtilmiştir.
  • [ X ]
    Öğe
    Positioning Buildings On A Zoning Island To Provide Maximum Shading: A Case Study
    (2019) İnce, Hüseyin; Erdem, Nuri
    Because summer days are long, and the weather is too hot, people desire shady spaces to escape the overwhelming effect of the sun. To keep buildings and open-air environments in the shade, a suitable building location design may be created at the planning stage. Positioning of buildings and recreation areas in the maximum amount of shade is closely dependent on the location of the buildings to be built, the distance between the buildings, the time of the day and the sun angles at a particular hour. It was found necessary to carry out this study, since no study was found to be carried out regarding the positioning of buildings in the maximum amount of shade. For buildings to be built in residential areas, separate or block arrangements are applied. This study discusses a building to be built on a reconstruction island in Adana in the Eastern Mediterranean Region of Turkey. First of all, the shading effects of the buildings adjacent to the building in a parcel were examined in detail based on various positions of the façades of the building and different values of the solar azimuth. As a result of the study, the positioning of the buildings for providing the maximum shading was investigated. If the front and rear façades of the buildings were located in the west-east direction, according to the positioning of the buildings in the north-south direction, the front and rear façades would be exposed to less sunlight and more shade. In h = ± 6 sun hours, the façades of buildings in the parcels facing the north were under the influence of the sun rays coming from the side, and the rear façades of the buildings were in the shade.

| Hitit Üniversitesi | Kütüphane | Açık Bilim Politikası | Açık Erişim Politikası | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Kütüphane ve Dokümantasyon Daire Başkanlığı, Çorum, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim