Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Duran, Murat" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
Sayfa Başına Sonuç
Sıralama seçenekleri
  • [ X ]
    Öğe
    Exploration of ceramic supports to be used in membrane reactors for hydrogen production and separation
    (Pergamon-Elsevier Science Ltd, 2021) Duran, Murat; Tuzun, F. Nihal
    The objective of this study is to develop ceramic supports employed in the preparation of catalytic membrane reactor using less catalyst and lower temperature and enabling H-2 production and separation together through the dry reforming of methane. For this reason, nine different ceramic supports are fabricated by using three different types of activated alumina (acidic, basic and neutral) and three different Si/Al molar ratios at two different calcination temperatures in order to investigate the surface acidity and basicity effect of supports to be used with impregnated Rh catalyst for rising the activity to CH4, CO2 and sensitivity to coke formation encountered with Ni-based catalysts. Subsequently, the effect of those variations on supports is determined by using XRD, SEM and BET instruments, in addition to this, H-2 permeability test of five supports having high BET surface areas is also performed with using constant volume-variable pressure technique at the temperatures of between 25 and 250 degrees C. Acidic alumina sintered at 600 degrees C and containing Si/Al ratio of 0.648 represented the highest hydrogen permeability with higher activity, whereas, neutral alumina calcined at the temperature of 600 degrees C having Si/Al ratio of 0.555 gave the highest activity with the lower hydrogen permeability, while basic alumina sintered at the temperature of 600 degrees C and including Si/Al ratio of 0.648 imparted lower activity with higher hydrogen permeability. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Silika kaplı alümina esaslı katalitik membranların hidrojen üretimi ve ayrımı için hazırlanması
    (Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2012) Duran, Murat; Tüzün, Nihal
    Membranlar distilasyon, adsorpsiyon, absorpsiyon, ekstraksiyon gibi geleneksel ayırma tekniklerine alternatif olan bir ayırma teknolojisidir. Bütün membran proseslerinde ana faktör ayırma aracı olarak kullanılan membrandır. Membranlar polimerik, cam, metal ve sıvı materyallerden hazırlanabilirler ve gözenekli veya gözeneksiz, simetrik veya asimetrik, ya da kompozit membran olabilirler.Geleneksel ayırma işlemlerine göre yüksek seçicilik, enerji tasarrufu, ortalama maliyet-performans oranı ve modülerlik gibi birçok avantaj getirirler. Ayrıca geleneksel ayırma araçlarıyla birlikte hibrid prosesler oluşturabilirler. Bu tez çalışmasında, membranlar ve önemli membran prosesleri, silika kaplı alümina esaslı katalitik membranların hidrojen üretiminde reaktör olarak seçilen inert membran reaktörler ve katalizör olarak Rh kullanılması irdelenmiştir.

| Hitit Üniversitesi | Kütüphane | Açık Bilim Politikası | Açık Erişim Politikası | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Kütüphane ve Dokümantasyon Daire Başkanlığı, Çorum, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2026 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim