Güncel Gönderiler: Mühendislik Fakültesi
Toplam kayıt 564, listelenen: 241-260
-
Detection of aflatoxin M1 in milk and dairy products consumed in Adana, Turkey
(Society of Dairy Technology, 2009)A total of 70 dairy products consisting of 20 sterilized milk, 10 butter, 20 white cheese and 20 Kashar cheese samples were analysed for aflatoxin M 1(AFM1) by enzyme-linked immunosorbent assay (ELISA). The detection limit ... -
Microstructural properties of particle-reinforced polytetrafluoroethylene composite bearings after wear
(Springer New York LLC, 2015)High-performance engineering polymers that ensure the desired properties of journal bearings and give good wear results are investigated. We determine the microstructural properties of polymer-based particle-reinforced ... -
Electrical conductivity and spectroscopic characterization of Blends of poly(2-chloroaniline)/polyaniline P(2ClANI)/PANI copolymer with PVC exposed to gamma-rays
(2014)Poly(2-chloroaniline)/polyaniline P(2ClANI)/PANI) random copolymer was synthesized in the form of nanoparticles by chemical routes. Incorporation of P(2ClANI) into PANI backbone significantly increased the solubility of ... -
Nonlinear vibrations of spring-supported axially moving string
(Kluwer Academic Publishers, 2015)In this study, multi-supported axially moving string is discussed. Supports located at the ends of the string are simple supports. A support located in the middle section owns the features of a spring. String speed is ... -
Prediction model for the impact response of glass fibre reinforced aluminium foam sandwiches
(Elsevier Ltd, 2015)The use of sandwich structures combines low weight with high energy absorbing capacity, so they are suitable for applications in the transport industry (automotive, aerospace, shipbuilding industry), where the "lightweight ... -
A novel two-layered glass-ceramic sealant design for solid oxide fuel cells
(John Wiley and Sons Ltd, 2017)A thermo-mechanical stress develops on the sealant of an solid oxide fuel cell (SOFC) stack because of thermal expansion coefficient (TEC) differences among ceramic electrolyte, metallic interconnector, and glass-ceramic ... -
A novel two-part interconnector for solid oxide fuel cells
(John Wiley and Sons Ltd, 2014)A two-part interconnector is developed for solid oxide fuel cell stacks to reduce cost and to improve sealing. The novel interconnector involves a metallic core for current collection and gas distribution and a ceramic ... -
Residual stress analysis and expansion of plastic zone in simple supported woven Ni-Cr reinforced thermoplastic matrix composite laminated plates
(2006)In this study, a residual stress analysis is carried out on symmetric and antisymmetric cross-ply and angleply thermoplastic simple supported laminated plates for transverse loading. Low density polyethylene thermoplastic ... -
Effect of electrolytic nickel coating on fatigue life of iron based powder metal parts
(2011)Electrolytic coating is one of the methods mainly used to provide corrosion resistance for the powder metal parts. The coatings have strong effects on mechanical properties of coated parts as well as on surface properties. ... -
Structural, electronic, and electrochemical analyses of sputter-coated Pt and Pt–Co/GCE electrodes with ultra-low metal loadings for PEM fuel cell applications
(Springer Netherlands, 2017)In this study, unsupported platinum and platinum–cobalt ultra-thin catalyst layers with varying metal loadings were prepared by a sequential magnetron sputtering technique. The deposited catalyst layers were characterized ... -
Electrochemical copper (II) sensor based on chitosan covered gold nanoparticles
(Kluwer Academic Publishers, 2014)This study outlines a new sensing platform based on glassy carbon electrodes modified by gold nanoparticles (AuNPs) for the determination of heavy metal. A glassy carbon electrode was modified by chitosan stabilized AuNPs. ... -
Acoustic analysis of a liquefied petroleum gas-fired pulse combustor
(2008)Experimental investigation of acoustic characteristics of a Helmholtz type liquefied petroleum gas-fired pulse combustor is presented. In the experiments, the length of the tail pipe was changed from 1.9 m to 1.3 m by 10 ... -
Atom-economical synthesis of complex heterocycles with N-O moiety
(Wiley Blackwell, 2015)A concise and facile method for the synthesis of heterocyclic compounds with N-O tether was introduced. The two important steps of the synthesis are a Mitsunobu reaction and C-H activation. The Mitsunobu protocol allows ... -
Impact response of waste poly ethylene terephthalate (PET) composite plate
(Springer New York LLC, 2017)Poly ethylene terephthalate (PET) is considered one of the most important engineering polymers for the last two decades due to its rapid growth of usage, aesthetic appearance, good light transmittance, and smooth surface. ... -
Fabrication and characterization of gold-nanoparticles/chitosan film: A scaffold for L929-fibroblasts
(2013)The objective of the present study was to fabricate a gold nanoparticle crosslinked chitosan (Ch/AuNPs) composite film simple and to evaluate its use as a carrier matrix for L929- fibroblasts. L929- fibroblasts were seeded ... -
Design of hybrid composites from scrap aluminum reinforced with (SiC+TiO2+Gr+Ti+B)
(Springer New York LLC, 2017)Hybrid Metal Matrix Composites (HMMCs) have very light weight, high strength, and show better resistance to corrosion, oxidation, and wear. Impact resistance is an especially important property of these HMMCs which is ... -
Web based evaluation of earthquake damages for reinforced concrete buildings
(Techno Press, 2017)The first determination and assessment of the damages to structures after the earthquake is important for preventing increase in loss of life and property that may occur in later times. When rapid damage assessment is ... -
The thermodynamic stability of intermediate solid solutions in LiFePO4 nanoparticles
(Royal Society of Chemistry, 2016)Theoretical predictions from first principles and recent advances in in situ electrochemical characterization techniques have confirmed the presence of solid-solution states during electrochemical (de)lithiation of LiFePO4 ... -
Particle-size and morphology dependence of the preferred interface orientation in LiFePO4 nano-particles
(Royal Society of Chemistry, 2014)We gain new insights into the equilibrium properties and potential two-phase lithiation mechanisms in LiFePO4 nano-particles by conducting a first-principles investigation of the anisotropic chemical interfacial energy ... -
Study on adsorption, regeneration, and reuse of crosslinked chitosan graft copolymers for Cu(II) ion removal from aqueous solutions
(Desalination Publications, 2014)This study deals with the adsorption, regeneration, and reuse of chitosan-graft-itaconic acid and chitosan-graft-crotonic acid beads for Cu(II) ion removal from aqueous solutions. For this aim, adsorption capacities, ...