Ara
Toplam kayıt 103, listelenen: 21-30
Low velocity impact response of glass fiber reinforced aluminium foam sandwich
(European Conference on Composite Materials, ECCM, 2012)
The aim of this study was the analysis of the bending and the low - velocity impact response of aluminium foam sandwich reinforced by the outer skins made of glass fiber reinforced epoxy matrix and the results were compared ...
Elastoplastic stress analysis of functionally graded disc under internal pressure-complas XII
(2013)
The study deals with elastoplastic stress analysis of a hollow disk made of functionally graded materials (FGMs) subjected to an internal pressure. The material properties of disc are assumed to vary radially according to ...
Design of sma based actuators used in robotics
(2013)
This work introduces to Shape Memory Alloy (SMA) using in Robotics as actuators. We investigated a quadruped platform actuated by SMAs which act with variable elasticity. SMAs ought to prove necessary forces for all gaits. ...
A monitoring and control system integrated with smart phones for the efficient use of underground water resources in agricultural product growing
(Hitit University, 2017)
Monitoring and control system is very important for crop development process in agriculture zones. A structure which is carried out based on the type of the product with the knowledge of temperature and humidity values of ...
Experimental investigation of cooling performance a heat pump for near azeotropic refrigerant R404A
(Hitit University, 2017)
In this study, in order to investigate the effect of outdoor air temperatures on the performance of an air source heat pump, operated in cooling mode, using R404A refrigerant, the heat pump was tested at the outdoor air ...
Analysis of scoring resistance on coated spur gears by considering surface roughness
(Hitit University, 2017)
With the rise of velocity and momentum in machines as a result of technological developments, on gears, alongside refraction from the bottom of the gears and pitting formation, and scoring formation has showed up. In the ...
Elektro-erozyon ile işlemede işleme haznesine uygulanan titreşimlerin işleme performansına etkilerinin incelenmesi
(2011)
Bu çalısmada, elektro-erozyon ile islemede (EEİ), isleme kosullarında isleme haznesine uygulanan titresimlerin performans çıktıları (isparçası isleme hızı, elektrot asınma hızı, bağıl asınma ve isparçası yüzey pürüzlülüğü) ...
Exergy destruction analysis of a gas turbine power plant
(Hitit Üniversitesi Fen Bilimleri Enstitüsü, 2018)
According to the data released by “Republic of Turkey-the Ministry of Energy and Nat ural Resources”, by the end of July 2017, 34% of the electricity of Turkey was produced from natural gas. As it is compared to ...
A novel two-layered glass-ceramic sealant design for solid oxide fuel cells
(John Wiley and Sons Ltd, 2017)
A thermo-mechanical stress develops on the sealant of an solid oxide fuel cell (SOFC) stack because of thermal expansion coefficient (TEC) differences among ceramic electrolyte, metallic interconnector, and glass-ceramic ...
A novel two-part interconnector for solid oxide fuel cells
(John Wiley and Sons Ltd, 2014)
A two-part interconnector is developed for solid oxide fuel cell stacks to reduce cost and to improve sealing. The novel interconnector involves a metallic core for current collection and gas distribution and a ceramic ...