Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 108, listelenen: 16-35
-
Deep drawing of polymer coated metal sheets
(Korean Society of Mechanical Engineers, 2019)In the present study, the deep drawing of polymer coated metallic sheets were experimentally investigated to reduce friction and increase manufacturing efficiency without using a lubricant. Coating of metal sheets with a ... -
Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
(Taylor and Francis Ltd., 2016)In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi ... -
Design and implementation of real time monitoring and control system for distributed robotic systems supported with IOS/android application
(Strojarski Facultet, 2018)In this study, a real time monitoring and control of the working parameters of distributed robotic systems used in manufacturing processes is presented. Additionally, a fault diagnosis and protection system is developed ... -
Development of a design for a crash energy management system for use in a railway passenger car
(SAGE Publications Ltd, 2016)A design approach for a crash energy management (CEM) system for a N13-type railway passenger car used by the Turkish State Railway Company is developed in this paper. The components of the CEM system are honeycomb-structured ... -
Effect of attachment types and number of implants supporting mandibular overdentures on stress distribution: A computed tomography-based 3D finite element analysis
(Elsevier Ltd, 2015)The objective of this study was to calculate stresses in bone tissue surrounding uncoupled and splinted implants that are induced by a bite force applied to the mandible and to determine whether the number of mandibular ... -
Effect of coating material on wear in internal gears
(Materials and Energy Research Center, 2017)Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards' wear formulation ... -
Effect of different palatal vault shapes on the dimensional stability of glass fiberreinforced heat-polymerized acrylic resin denture base material
(2012)Objective: The aim of this study was to determine the effect of different palatal vault shapes on the dimensional stability of a glass fiber reinforced heat polymerized acrylic resin denture base material. Methods: Three ... -
The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives
(Elsevier Ltd, 2015)It was aimed to investigate the effect of five different fillers on the adhesion strength of the metal parts used in different industries by using T-peel and lap-shear tests with respect to ASTM D 1876 and ASTM D 1002 ... -
Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method
(Elsevier Ltd, 2016)In this study, the effect of both cylindrical grooved pin-fins (C-GPFs) and triangular grooved pin-fins (T-GPFs) into the rectangular channel on heat transfer augmentation, Nusselt number and friction factor were experimentally ... -
Effect of heating position on thermal energy storage in cavity with/without open-cell metallic foams
(Taylor and Francis Ltd., 2016)Thermal energy storage systems inherently store heat at different heating positions. In other words, the heat storage performance changes depending on the heating positions. In this study, the effects of the heating surface ... -
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
(Elsevier Ltd, 2016)An experimental and numerical analysis of the influence of impactor shapes on the low velocity impact performance of aluminium sandwich composite plates has been carried out. The aluminium composite panels were manufactured ... -
Effect of swirl generator inserted into a tube on exergy transfer: Decaying flow
(Taylor and Francis Inc., 2014)This study experimentally investigates the effect of conical injector type swirl generator inserts on heat and exergy transfer in a uniform heat flux tube for turbulence regime. One hundred twenty watts of heat are applied ... -
Effects of lithium doping on hydrogen storage properties of heat welded random CNT network structures
(Elsevier Ltd, 2016)This paper presents the effects of lithium doping on the hydrogen storage capability of heat welded random carbon nanotube (CNT) network structures having different cross-link densities at room temperature. Cluster based ... -
An elastic-plastic and residual stress analysis steel reinforced thermoplastic composite cantilever beam
(2010)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
An elastic-plastic stress analysis of woven Ni-Cr reinforced thermoplastic composite cantilever beam
(2007)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by Ni-Cr steel fibers. The beam is loaded by a constant ... -
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ... -
Elektro-erozyon ile işlemede işleme haznesine uygulanan titreşimlerin işleme performansına etkilerinin incelenmesi
(2011)Bu çalısmada, elektro-erozyon ile islemede (EEİ), isleme kosullarında isleme haznesine uygulanan titresimlerin performans çıktıları (isparçası isleme hızı, elektrot asınma hızı, bağıl asınma ve isparçası yüzey pürüzlülüğü) ... -
Energy absorption of 2D auxetic structures fabricated by fused deposition modeling
(SPRINGER HEIDELBERG, 2023)Auxetic structures have become a very popular subject in recent years due to their interesting physical and mechanical properties such as light weight, energy absorption capability, and impact resistance. In this context, ... -
Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading
(Taylor and Francis Ltd., 2015)The main objective of this study is to investigate the effects of thickness-gradient patterns on energy absorption characteristics of aluminium-based circular tubes under axial impact loading. Functionally graded thickness ... -
Energy absorption of thin-walled tubes enhanced by lattice structures
(Elsevier, 2019)Thin-walled structures filled or covered by various materials have been proposed for energy absorption applications in recent years. At this point, additive manufacturing technologies provide an unprecedented opportunity ...