Ara
Toplam kayıt 108, listelenen: 61-70
Experimental and numerical study of alumina reinforced aluminum matrix composites: Processing, microstructural aspects and properties
(Elsevier Ltd, 2016)
Co-continuous alumina-aluminum composite materials with excellent physical and mechanical properties offer great potentials for lightweight, wear resistant, and high-temperature applications. They combine metallic properties ...
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
(Elsevier Ltd, 2016)
An experimental and numerical analysis of the influence of impactor shapes on the low velocity impact performance of aluminium sandwich composite plates has been carried out. The aluminium composite panels were manufactured ...
An experimental study on the compressive response of CFRP honeycombs with various cell configurations
(Elsevier Ltd, 2019)
The experimental investigation on the compressive response of carbon fiber reinforced polymer (CFRP) honeycombs with various cell configurations was carried out in the present work. The CFRP honeycomb specimens were ...
Saturation operation on the direct current motor that is used for manipulator control
(2013)
In this study, the saturation operation on the motor armature current has been carried out with a manipulator control algorithm. Manipulator system is controlled by state feedback plus integral error control strategy. ...
Effect of different palatal vault shapes on the dimensional stability of glass fiberreinforced heat-polymerized acrylic resin denture base material
(2012)
Objective: The aim of this study was to determine the effect of different palatal vault shapes on the dimensional stability of a glass fiber reinforced heat polymerized acrylic resin denture base material. Methods: Three ...
Design and implementation of real time monitoring and control system for distributed robotic systems supported with IOS/android application
(Strojarski Facultet, 2018)
In this study, a real time monitoring and control of the working parameters of distributed robotic systems used in manufacturing processes is presented. Additionally, a fault diagnosis and protection system is developed ...
High temperature wear behavior of the surface-modified externally cooled rolls
(Elsevier B.V., 2018)
Externally cooled rolls of a steel plant were coated using three different surface modification techniques, namely titanizing, boronizing and borotitanizing. The grown coatings were examined using optical microscopy, ...
An elastic-plastic stress analysis steel-reinforced thermoplastic composite cantilever beam
(2008)
In the present study an analytical elastic-plastic stress analysis is carried out for a low-density homogeneous polyethylene thermoplastic cantilever beam reinforced by steel fibers. The beam is loaded by a constant single ...
Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
(Taylor and Francis Ltd., 2016)
In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi ...
Transient turbulent flow and heat transfer phenomena in plate-fin type cross-flow heat exchanger
(2011)
In this article, a transient performance of a plate-fin cross-flow heat exchanger with convergent-divergent longitudinal vortex generators is investigated. The effect of flow geometry is taken into account to analyze the ...