Ara
Toplam kayıt 24, listelenen: 11-20
Determination of noise level of a gas-fired pulse combustor
(2007)
Experimental determination of noise level of a Helmholtz type gas-fired pulse combustor is presented. During the tests, the tail pipe length was varied from 1.9 m to 1.3 m by 10 cm intervals. Noise level measurements were ...
Performance investigation of an eight cylinder gasoline engine
(American Society of Mechanical Engineers (ASME), 2014)
Performance investigation of a Chevrolet 5.7, eight cylinder gasoline engine is experimentally carried out at laboratuary conditions by means of the special softwares called "NetDyn" and "WinDyn". This experimental work ...
Monitoring and control of PLC based motion control systems via device-net
(Institute of Electrical and Electronics Engineers Inc., 2014)
The control of mechanical systems are generally applied by using electric motors which are useful for the control of velocity, position and torque. On the other hand, servo motors are preferred due to their characteristic ...
Low velocity impact response of glass fiber reinforced aluminium foam sandwich
(European Conference on Composite Materials, ECCM, 2012)
The aim of this study was the analysis of the bending and the low - velocity impact response of aluminium foam sandwich reinforced by the outer skins made of glass fiber reinforced epoxy matrix and the results were compared ...
Investigation of irreversibilities in the compression process for alternative refrigerants in a vapor compression refrigeration cycle
(2008)
Irreversibility analyses during compression process are presented for some refrigerants namely, R290, R134a, R12, R22, and R152a in a vapor compression refrigeration cycle. The effects of evaporator temperature, condenser ...
Elastoplastic stress analysis of functionally graded disc under internal pressure-complas XII
(2013)
The study deals with elastoplastic stress analysis of a hollow disk made of functionally graded materials (FGMs) subjected to an internal pressure. The material properties of disc are assumed to vary radially according to ...
Design of sma based actuators used in robotics
(2013)
This work introduces to Shape Memory Alloy (SMA) using in Robotics as actuators. We investigated a quadruped platform actuated by SMAs which act with variable elasticity. SMAs ought to prove necessary forces for all gaits. ...
Effect of tooth profile modification on wear in internal gears
(IOP Publishing Ltd, 2018)
Internal gears are often used in the automotive industry when two gears are required to rotate in the same direction. Tooth shapes, slippage speeds at the beginning and end of meshing are different according to the external ...
Numerical investigation of amounts of heat, power and temperature distribution in IT-SOFC
(Electrochemical Society Inc., 2013)
In this study, thermodynamic and heat transfer concepts were combined to understanding correlation of heat, power and temperature gradient on the cell. All of heat sources and amounts has been determined for electrolyte ...
Heat transfer enhancement methods: Concave and convex shape fins
(Avestia Publishing, 2016)
The heat transfer coefficient is a common engineering concept and a significant number of researchers are focusing on improving the heat transfer performance of the system by increasing the heat transfer coefficient. Heat ...