Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorTüzün, Fatma Nihal
dc.contributor.authorGürü, Metin
dc.contributor.authorAkyüz,Yüksel
dc.date.accessioned2019-05-10T09:39:57Z
dc.date.available2019-05-10T09:39:57Z
dc.date.issued2007
dc.identifier.citationTüzün, F. N., Gürü, M., Akyüz, Y. (2007). Comparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828–EPIKURE 3090 and DURATEK KLM 606A–DURATEK KLM 606B. Polymer Composites, 28(6), 762-770.en_US
dc.identifier.issn0272-8397
dc.identifier.urihttps://doi.org/10.1002/pc.20342
dc.identifier.urihttps://hdl.handle.net/11491/812
dc.description.abstractThe aim of the study is to determine the optimum cure temperatures and kinetics for two different epoxy resin systems without using solvent. Two resin systems consist of EPIKOTE 828® epoxy resin-EPIKURE® 3090 polyamidoamine curing agent and DURATEK® KLM 606A epoxy resin-DURATEK®KLM 606B polyamide curing agent. The ratio of resin to curing agent was kept as 1:1 for both the systems. Curing temperatures of both the systems were determined and kinetic parameters were calculated with respect to the experimental results following nth-order kinetics. Then, a series of isothermal temperatures was applied to the resin systems in order to assess the cure process in terms of conversion, time, and temperature by using differential scanning calorimeter (DSC). The test results of both systems show that the rate of degree of cure for EPIKOTE 828® epoxy resin-EPIKURE® 3090 polyamidoamine curing agent system is approximately 10 times higher than that of DURATEK® KLM 606A epoxy resin-DURATEK® KLM 606B polyamide curing agent system at 230°C. © 2007 Society of Plastics Engineers.en_US
dc.language.isoeng
dc.relation.isversionof10.1002/pc.20342en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject[Belirlenecek]en_US
dc.titleComparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828-EPIKURE 3090 and DURATEK KLM 606a-DURATEK KLM 606ben_US
dc.typearticleen_US
dc.relation.journalPolymer Compositesen_US
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümüen_US
dc.identifier.volume28en_US
dc.identifier.issue6en_US
dc.identifier.startpage762en_US
dc.identifier.endpage770en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster