Electrolytic production of Cu-Ni alloys in CaCl2-Cu2S-NiS molten salt
[ X ]
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Bv
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
An alternative metal/alloy production method, known as direct electrochemical reduction (DER), was introduced for the fabrication of CuNi alloys from mixed sulfides (Cu2S, NiS) under both galvanostatic and potentiostatic conditions. The influences of the process parameters (e. g., cell voltage and current) on the compositions of the reduced compounds were investigated to yield industrially desirable alloys, namely, CuNi10, CuNi20, and CuNi30. The electrochemical behaviors of Cu2S and NiS in CaCl2 melt were examined at a temperature of 1200 degrees C via cyclic voltammetry (CV). Based on the CV results, the cathodic reduction of Cu2S occurred in one step and cathodic reductions of NiS occurred in two steps, i. e., Cu2S double right arrow Cu for copper reduction and NiS. Ni3S2. Ni for nickel reduction. Galvanostatic studies revealed that it was possible to fabricate high-purity CuNi10 alloys containing a maximum sulfur content of 320x10(-6) via electrolysis at 10 A for 15 min. Scanning electron microscopy along with energy-dispersive X-ray spectrometry and optical emission spectroscopy (OES) examinations showed that it was possible to fabricate CuNi alloys of preferred compositions and with low levels of impurities, i. e., less than 60 x 10(-6) sulfur, via DER at 2.5 V for 15 min.
Açıklama
Anahtar Kelimeler
molten salt electrolysis, electro-reduction, copper extraction, copper sulfide, nickel sulfide, Cu-Ni alloys
Kaynak
Transactions Of Nonferrous Metals Society Of China
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
28
Sayı
10
