Güncel Gönderiler: Makale Koleksiyonu
Toplam kayıt 131, listelenen: 81-100
-
An interactive gis-based software for dynamic monitoring of rivers
(Scibulcom Ltd., 2014)Water quality research and development attempts have been the most valuable resources in the sense of model calibration and verification techniques. Due to the fact that current degree of pollution in rivers and importance ... -
A kind of energy storage technology: Metal organic frameworks
(2012)Abstract- For last fifteen years energy has been transferred by using electricity. As an energy carrier electricity has some disadvantages like its wire need for transportation and its being non-storable for large amounts. ... -
Production of Ti-Fe based MgAl2O4 composite material by pressureless infiltration method
(Gazi University, 2015)In spite of their high temperature and corrosion resistance, ceramics show a brittle nature under applied loads and this limits their usage areas. In order to compensate the weakness of ceramics with metals, which have ... -
Solid phase synthesis of anhydrous zinc borate from zinc and boron oxide and utilization as a flame retardant in dye and textile
(Gazi University, 2014)Durability of materials against flame and stability at high temperatures are very important in order to increase the field of use. Non-flammability is not the only requirement; these materials should not have toxic gas ... -
Evaluation of environmental wastes in building material
(2013)In this study, it was produced composite material by using environmental waste sources of Turkey in brick clay. It was selected Resadiye Clay as main material and boron waste of Kütahya-Emet Boron Works, fly ash of Seyitömer ... -
A validated RP-LC method for salmeterol and fluticasone in their binary mixtures and their stress degradation behavior under ICH-recommended stress conditions
(Maik Nauka Publishing / Springer SBM, 2014)Simple, accurate, precise and fully validated analytical methods for the simultaneous determination of salmeterol xinafoate and fluticasone propionate in combined dosage forms have been developed. These drugs were exposed ... -
Degradation of poly(vinyl chloride) onto KF-Al 2O 3
(2010)g-Alumina coated with potassium fluoride, KF-Al 2O 3 proved dehydrochlorination of poly(vinyl chloride), in tetrahydrofuran. The molecular changes was observed in the accurance of polyene sequence distribution by using ... -
Chitosan based metal-chelated copolymer nanoparticles: Laccase immobilization and phenol degradation studies
(Elsevier Ltd, 2017)Immobilization improves the stability and reusability of enzymes. In this study, laccase, which is a green biocatalyst, was immobilized onto Cu (II)-chelated chitosan nanoparticles via adsorption and successfully applied ... -
Flexible self-assembled polyelectrolyte thin films based on conjugated polymer: Quartz cristal microbalance dissipation (QCM-D) and cyclic voltammetry analysis
(Elsevier B.V., 2019)The fabrication of LbL (layer by layer) self-assembled thin films is attracting attention for various applications. Hence, the detailed characterization of these films is very vital. In this study, interaction between the ... -
Surface imprinted bacterial cellulose nanofibers for hemoglobin purification
(Elsevier B.V., 2017)There is a significant need for the development of the novel adsorbents in the field of protein purification. In this study, thin hemoglobin imprinted film (MIP) was fabricated onto the bacterial cellulose nanofibers’ ... -
Molecularly imprinted composite bacterial cellulose nanofibers for antibiotic release
(Taylor and Francis Inc., 2019)The aim of this work is to develop drug carrier system with high loading capacity and controlled drug release profile for antibiotic release. For this purpose, composite molecularly imprinted nanofibers were prepared via ... -
Recognition of lysozyme using surface imprinted bacterial cellulose nanofibers
(Taylor and Francis Inc., 2017)Here, we developed the lysozyme imprinted bacterial cellulose (Lyz-MIP/BC) nanofibers via the surface imprinting strategy that was designed to recognize lysozyme. This study includes the molecular imprinting method onto ... -
Efficient removal of acidic dye using low-cost biocomposite beads
(2013)The objective of this study is to prepare and characterize chitosan/zeolite biocomposite beads and utilize them as adsorbent for removal of anionic dye, Acid Black 194 (AB194). Characterization studies of biocomposite beads ... -
Effect of boiling point and density prediction methods on stochastic reconstruction
(American Chemical Society, 2018)Stochastic reconstruction (SR) methods are used to generate a series of molecules that mimic the properties of complex mixtures using partial analytical data. Determining a quantitative composition using these methods is ... -
Hydrogen storage properties of mono-and bidentate MOF structured orotate complexes
(Materials Research Society, 2014)One of the barriers for wide usage of hydrogen energy system is efficient storage. To store more hydrogen efficiently, physisorption is a choice among the others with high storage performance, reversibility, and lifecycles. ... -
The inhibition of steel corrosion in acidic solutions by a new Schiff base
(Sociedad Chilena de Quimica, 2016)The inhibition effect of 2,2?- (((thiobis (4,1 phenylene)) bis(azanylylidene)) bis(methanylyidene)) bis(4-methoxyphenol) (BIS-IMIN) on the corrosion behavior of 304-stainless steel (SS) in 0.5 M HCl solution was studied ... -
Effect of surfactant types on the size of tin oxide nanoparticles
(Polish Academy of Sciences, 2017)In this study, tin oxide (SnO2) nanoparticles were synthesized by hydrothermal method in the presence of hydrazine and ammonia by adding surfactant for 12 h in a Teflon autoclave at 100°C reaction temperature. Tin(II) ... -
The effect of aluminum and ammonium perchlorate content on temperature sensitivity, mechanical properties and performance of HTPB propellants
(The Japan Society for Aeronautical and Space Sciences, 2007)This paper describes the effect of aluminum content variation of HTPB (hydroxyl terminated polybutadiene) propellants on temperature sensitivity, mechanical properties and performance values. Aluminum (Al) content was ... -
Conversion of KCl into KBH4 by mechano-chemical reaction and its catalytic decomposition
(Springer New York LLC, 2017)Production of KBH4, in the presence of KCl, B2O3 and MgH2 by means of a mechanical reaction and a dehydrogenation kinetic, constitute the main parts of this study. Operating time and reactant ratio are considered as two ... -
Combined experimental and theoretical investigation of characterization and hydrogen storage properties of Zn(II) based complex and composites
(Elsevier Ltd, 2015)Metal organic structured coordination complex was synthesized by using Zn(II), 1,10 Phenantroline and teraphtalic acid building blocks. Then the synthesized compound have been characterized with Ft-IR, TGA/DTA/DrTGA, EA, ...