Effects of holding force on the springback behavior of annealed aluminum plates
Yükleniyor...
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Ltd
Erişim Hakkı
Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
info:eu-repo/semantics/openAccess
info:eu-repo/semantics/openAccess
Özet
Typical V-bending process was performed to investigate the effects of holding force on springback behavior of 1050-H14 aluminum alloy plates annealed at 120 °C for 20 minutes. Tests were conducted on a universal testing machine with 60° V-bending mold. Various holding forces (2.25 kN which is slightly higher than the required force for bending operation, 5 kN, 10 kN and 15 kN) were applied at the end of the bending processes to investigate the hardening effect on springback values. The test results showed that annealing decreases springback values in all anisotropy directions. It is also clear from the test data that application of holding force has a significant affirmative effect on springback values. © 2016 The Authors. Published by Elsevier ltd.
Açıklama
International Conference on Manufacturing Engineering and Materials, ICMEM 2016, 6 June 2016 through 10 June 2016,
Anahtar Kelimeler
Annealing, Holding Force, Springback, V-Bending
Kaynak
Procedia Engineering
WoS Q Değeri
N/A
Scopus Q Değeri
N/A
Cilt
149
Sayı
Künye
Erdin, M. E., Atmaca, A. (2016). Effects of holding force on the springback behavior of annealed aluminum plates. Procedia Engineering, 149, 56-61.
