Experimental investigation of heat transfer in a channel with new winglet-type vortex generators

Basit Öğe Kaydı
dc.authorid0000-0002-7753-0355
dc.contributor.authorÇalışkan, Sinan
dc.date.accessioned2019-05-10T09:38:52Z
dc.date.available2019-05-10T09:38:52Z
dc.date.issued2014
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractBoth new punched triangular vortex generators (PTVGs) and punched rectangular vortex generators (PRVGs) have been developed. Both the triangular and rectangular vortex generators were directly punched from the longitudinal winglet at attack angles of 15°, 45° and 75°, respectively. Measurements were carried out for a rectangular channel of an aspect ratio of AR = 2, for a winglet transverse pitch (S) to a longitudinal winglet height (e) ratio of S/e = 0.59, and a winglet height (e) to a channel height (H) ratio of e/H = 0.6. The parameters included the location of the punched vortex generator on the longitudinal winglet, the geometric shapes of the punched vortex generators, and the attached angle of punched vortex generators. The Reynolds numbers considered for the channel flow case (based on the hydraulic diameter) ranged from 3288 to 37,817. The heat transfer results were obtained using the infrared thermal imaging technique. The heat transfer results of the vortex generators were compared with those of a smooth plate. The best heat transfer performance was obtained with the PTVGs. The presence of the vortex generators produced higher heat transfer coefficients than the smooth plate surfaces. Correlations were developed for the averaged Nusselt number for the PTVGs and PRVGs. Results showed a 23-55% increase in heat transfer due to the use of vortex generators. These vortex generators show a more significant increase in heat transfer coefficient for channel flows. © 2014 Elsevier Ltd. All rights reserved.
dc.identifier.citationCaliskan, S. (2014). Experimental investigation of heat transfer in a channel with new winglet-type vortex generators. International Journal of Heat and Mass Transfer, 78, 604-614.
dc.identifier.doi10.1016/j.ijheatmasstransfer.2014.07.043
dc.identifier.endpage614en_US
dc.identifier.issn0017-9310
dc.identifier.scopusqualityQ1
dc.identifier.startpage604en_US
dc.identifier.urihttps://doi.org/10.1016/j.ijheatmasstransfer.2014.07.043
dc.identifier.urihttps://hdl.handle.net/11491/519
dc.identifier.volume78en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier Ltd
dc.relation.ispartofInternational Journal of Heat and Mass Transfer
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectHeat Transfer Enhancementen_US
dc.subjectInfrared Thermal Imaging Techniqueen_US
dc.subjectPressure Dropen_US
dc.subjectPunched Vortex Generatorsen_US
dc.titleExperimental investigation of heat transfer in a channel with new winglet-type vortex generators
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu