Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method

Basit Öğe Kaydı
dc.authorid0000-0002-7753-0355
dc.contributor.authorÇalışkan, Sinan
dc.contributor.authorNasiri Khalaji, Mansour
dc.contributor.authorBaşkaya, Şenol
dc.contributor.authorKotcioğlu, İsak
dc.date.accessioned2019-05-10T09:39:31Z
dc.date.available2019-05-10T09:39:31Z
dc.date.issued2016
dc.departmentHitit Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractIn this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi experimental design method. The heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array were investigated using a thermal infrared camera. Both V-SR and CD-SR configurations, with an angle of 45°, were considered. Both projected and total Nusselt numbers were considered as performance statistics. After the data on each quality characteristic were obtained from the orthogonal arrays, a main effect analysis and analysis of variance (ANOVA) were conducted to determine the parameters that had significant effects on these quality characteristics. The L32 (21 × 43) orthogonal array was selected as an experimental plan for the four parameters. The Taguchi method was applied with an optimization process to reach the maximum heat transfer. Experimental results validated the suitability of the proposed approach. The best heat transfer performance was obtained with the V-SR arrangements. Copyright © Taylor and Francis Group, LLC.
dc.identifier.citationÇalışkan, S., Nasiri Khalaji, M., Başkaya, Ş., Kotcioğlu, İ. (2016). Design analysis of impinging jet array heat transfer from a surface with V-shaped and convergent–divergent ribs by the taguchi method. Heat Transfer Engineering, 37(15), 1252-1266.
dc.identifier.doi10.1080/01457632.2015.1119596
dc.identifier.endpage1266en_US
dc.identifier.issn0145-7632
dc.identifier.issue15en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage1252en_US
dc.identifier.urihttps://doi.org/10.1080/01457632.2015.1119596
dc.identifier.urihttps://hdl.handle.net/11491/718
dc.identifier.volume37en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor and Francis Ltd.
dc.relation.ispartofHeat Transfer Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subject[Belirlenecek]en_US
dc.titleDesign analysis of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs by the taguchi method
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu